Champion PRO User Manual page 18

6. The Receiver tab should show CHAPRO in the antenna selection window,
the Abs. value should be 77.8mm and the Vertical radio button should be
selected. The elevation mask should be at least 10 if not higher depending
on site conditions. Check the IMU (Inertial Measurement Unit) check box if
you intend to use automatic level checking (additional configuration and
settings required).
7. To configure the Pro as a network rover select Data Collector Internet for
the Device field and NTRIP for the Network field. Press the Hammer and
wrench icon to add NTRIP broadcasters to the list of selectable broadcasters.
8. On the NTRIP Broadcasters screen enter an arbitrary name to identify the
broadcaster account in the Name field, eGPS Solutions for example. Next
enter the IP address for the broadcaster in the IP field, for example
107.7.166.152. Next enter the Port number in the Port field, for example
8080. Next enter your broadcaster account username and password, you
should be connected to the internet BEFORE starting SurvCE so the collector
can connect to the broadcaster and download the base station mount points
Champion PRO GNSS Receiver User Guide
7. Configuring through a web browser
Page 17