1. Manuals
  2. Brands
  3. PERCo Manuals
  4. Controller
  5. C-01
  6. Assambly and operation manual

PERCo C-01 Assambly And Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Controller
C-01
ASSEMBLY AND OPERATION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C-01 and is the answer not in the manual?

Questions and answers

Related Manuals for PERCo C-01

Summary of Contents for PERCo C-01

  • Page 1 Controller C-01 ASSEMBLY AND OPERATION MANUAL...
  • Page 2 Controller C-01 Assembly & Operation Manual...

  • Page 3: Table Of Contents

      MAINTENANCE ......................38     TRANSPORTATION AND STORAGE................39     Appendix 1. Instruction on connection of alcohol detector ..........40   Appendix 2. Instruction on connection of the controller through PoE-splitter ....42   Appendix 3. C-01 Controller Web-interface. User Manual..........44  ...

  • Page 4: Application

    WRC – wireless remote control. APPLICATION C-01 controller (hereinafter – the controller) is used in on-line based access control systems (incl. paid access and ticket access systems etc.). The controller supports connection up to 6 readers / barcode scanners (two - via Wiegand interface, two –...

  • Page 5: Technical Specifications

    Not including the consumption of readers, scanners and other additional equipment. Depends on the selected configuration of the controller. The configuration can be done in a third- party software via PERCo-C01 Exchange protocol or by using the templates from the controller Web-interface (Sect. 9.2).

  • Page 6: Supported Scanners

    All scanners must be preconfigured before you connect them to the controller (set interface parameters and barcode encode formats supported by scanner). Data that was read by scanner will be transferred via Ethernet interface in accordance with exchange application protocol (see PERCo-C01 exchange protocol). Scanner parameters are listed in Sections 8.4.2, 8.4.3.

  • Page 7: Delivery Set

    Assembly & Operation Manual DELIVERY SET 4.1 Standard delivery set Controller ........................... 1 Jumper ..........................5 Suppressor 15-18 V ......................2 Mounting hardware: Lead-through ......................... 1 Plastic dowel ........................3 Screw ..........................3 Self-adhesive mount ...................... 3 Plastic cable tie 100 mm ....................5 Package ..........................

  • Page 8: Description

    C-01 Controller DESCRIPTION 5.1 Design and operation The controller is produced in the form of electronics module in metal housing with a removable cover. The cover houses power indication. The controller provides:  Connection via Ethernet (IEEE 802.3);  Support of TCP/IP protocols;...
  • Page 9 Assembly & Operation Manual Figure 1. Controller top board Figure 2. Controller bottom board...
  • Page 10 C-01 Controller Table 1. The purpose of connecting blocks of the bottom board Contact Purpose Connector XT1 (Inputs) «Door sensor OD1» or «Input for PASS A signal» «Common» «Door sensor OD2» or «Input for PASS B» or «Additional input» «Additional input»...

  • Page 11: Signals Of Inputs

    Assembly & Operation Manual Controller has on the top board:  XP1 – connector for jumper installation that defines method of IP-address receiving (see Sect. 8.3);  X1 – microSD-card slot (installed not on every board model);  X2 – connector for the Ethernet cable; ...

  • Page 12: Inputs Dua, Dust, Dub, Fa

    C-01 Controller  input IN2: o door sensor (reed switch) №2, o PASS2 output of a turnstile, o Optional equipment;  inputs IN3, IN4: o optional equipment. Signals activation depends on description of their default status in Normal status of contact parameter (“normal_state”):...

  • Page 13: Settings Of Output Signals

    Assembly & Operation Manual 5.4 Settings of output signals 5.4.1 Relay outputs OUT1, OUT2 The controller is equipped with four relay outputs OUT1, OUT2. Connection to the outputs is performed via XT6, XT7 connecting blocks of the controller bottom board. Every output has a complex group of contacts: normally open NO, normally closed NC and common output C.

  • Page 14: Outputs Ld A, Ldst, Ld B

    C-01 Controller 5.4.3 Outputs Ld A, LdSt, Ld B The controller is equipped with three outputs type «TTL» (chip 74LVC04 and resistor 200 Ohm): Ld A, LdSt, Ld B. Connection shall be performed to the contacts of XT2 connecting block of the controller bottom board.

  • Page 15: Marking And Packaging

    Assembly & Operation Manual MARKING AND PACKAGING The marking label of the controller is placed on the back of the housing. The marking label provides following information concerning the controller:  trade mark and contact details of the manufacturer;  name and number of model; ...

  • Page 16: Installation

    C-01 Controller INSTALLATION Installation shall be performed in accordance with work safety noted in Sect. 7.1. Installation should be done in accordance with local building requirements. 8.1 Cable lengths Cables for mounting are shown in Table 2.  Do not lay cables at a distance less than 50 cm from a source of electromagnetic interference.

  • Page 17: Installation Order

    Assembly & Operation Manual 8.2 Installation order Connection to the controller is performed in accordance with scheme shown on Figures 4 – 16 with the use of cables from Table 2. The position of connecting blocks on the controller’s board is presented on Figure 2. Installation of connected devices (turnstiles, locks, power supply, etc.) is performed according to the instructions given in technical documents of corresponding devices.
  • Page 18 C-01 Controller Figure 4. Common scheme of connections 4. Fix the controller with three screws through holes in the controller housing (use dowels from the delivery set if necessary). 5. Select the way to set IP-address of the controller (Sect. 8.3).

  • Page 19: Method For Obtaining An Ip-Address

    Assembly & Operation Manual 9. Connect the rest of necessary equipment. Follow the next recommendations in connection of:  electromechanical (electromagnetic) locks and latches (Sect. 8.5);  turnstile (Sect. 8.6);  OD VCP (boom gates, gates etc.) (Sect. 8.7);  RC-panel (WRC device) (Sect. 8.8); ...

  • Page 20: Connection Of Readers / Scanners

    C-01 Controller Table 3. Variants of jumper installation on XP1 connector № Jumper position on XP1 connector IP-address obtaining method User mode «IP MODE» «IP DEFAULT» 8.4 Connection of readers / scanners Attention! When connecting to several interfaces simultaneously the total current consumption of all connected readers and/or scanners must not exceed: 1.5 A for +5 V power...

  • Page 21: Connecting Scanners Via Usb Interface

    (USB double-sided connector: USB1 is located at the bottom, USB2 – at the top, see Figure 1). Use profiled hole for cabling into controller housing (see Figure 5). Scanners that are connected via USB can operate with C-01 controller or in keyboard emulation mode (selector value  «Barcode-USB (keyboard)»), or in virtual COM-port mode.

  • Page 22: Connecting Locks

    C-01 Controller 8.5 Connecting locks When you connect the lock (latch) to the controller, follow the next recommendations: 1. To dissipate static electricity, is recommended to ground the housing or locking bar of the lock. In case of lock installation on a metal door, it is recommended to ground the door leaf.
  • Page 23 The locks LB-, LBP-series do not require mounting of the door sensor (the C-01 controllers can trace the door opening based on the contact group of the lock). In this case, is necessary to installed jumpers on the lower board of the controller: for OUT1 –...

  • Page 24: Turnstile And Electromechanical Gates Configuration

    8.6 Turnstile and electromechanical gates configuration Important: In software of PERCo-Web for operating device of the controller:  The parameter of OD Control output operation mode for PERCo turnstiles should be in Potential mode.  The parameter of OD Passage registration for swing gate PERCo-WMD-05S in SW PERCo-S-20 should be in On ID Card presentation.

  • Page 25: Connecting Od Vcp

    Assembly & Operation Manual Figure 10. Connection schemes of “Turnstile control” configuration 8.7 Connecting OD VCP When installing a controller, is necessary to correspond with operation logic of control unit of vehicle checkpoint:  Operation of control unit of vehicle checkpoint is performed via two relays - when passage is allowed OUT1 relay is activated and held, sending “Open”...
  • Page 26 C-01 Controller passage is allowed OUT1 relay is activated and held, sending “Open” signal. After a vehicle has passed through the checkpoint (detected by passage detector), or after waiting period is over, OUT1 relay switches to normal, after that boom barrier is closed automatically (it is recommended to set a minimum possible waiting period for automatic closing).

  • Page 27: Rc-Panel Configuration

    Assembly & Operation Manual Figure 12. Connection scheme of passage sensors Note:  Output normalization parameter of OD shall be set into After closing mode.  If operation is performed via one relay, Automatic closing function shall be turned on in the control unit of OD of vehicle checkpoint, in such case a minimum waiting period for automatic closing shall be set - Regulation T.C.V.

  • Page 28: Connecting A Fire Alarm Device

    C-01 Controller Figure 13. Connection scheme of RC-panel or WC of “Turnstile control” configuration The inputs DUA, DUSt and DUB in these configurations of the controller are activated by low-level signals (normally opened contact) regarding GND contact. Settings of signals that can be used for connection of the RC-panel are specified in Sections 5.3.2 and 5.4.3.
  • Page 29 Assembly & Operation Manual Attention! To connect the optional equipment with inductive load (Rn) to the outputs, it is necessary to use spark protection diode (VD1 on Figure 14). For example, Schottky diode for operating current not less than 1 A (1N5819). Figure 14.
  • Page 30 C-01 Controller Figure 16. Connection scheme of optional equipment to controller inputs...

  • Page 31: Configuration

    It is important that PC and controller are in the same subnet so they can be connected via Ethernet. By default, PERCo controllers are using IP-addresses from 10-th subnet, that is why it is necessary to configure additional parameters TCP/IP of the PC IP-address: 10.x.x.x (x- random numbers) and subnet...

  • Page 32: Connecting To Web-Interface Of The Controller

    C-01 Controller 9.3 Connecting to Web-interface of the controller Launch browser (eg. Internet Explorer for MS Windows OS or Safari for MacOS), and type the controller IP-address in the URL bar. The controller Web-interface start page will appear. Figure 17. Web-interface start page 1 –...

  • Page 33: Operation

    Assembly & Operation Manual 11 OPERATION When operating the controller, follow security measures indicated in Sect. 7.2. 11.1 ACM and controller operation algorithm Important:  In configurations «VCP» and «Two two-sided locks» change of ACM for VCP and locks shall be made simultaneously for both directions. ...
  • Page 34 C-01 Controller If passage was not performed till expiration of PWP, then OD will be blocked, «passage denial by the server command in direction…» event will be generated, indicators will display «ACM Control» (Sect. 11.2).  After pushing RC accept button OD will unlock in the desired direction for the PWP, indicators will display «Access granted»...

  • Page 35: Indication Of Acs And Controller Configurations

    Assembly & Operation Manual OD will be blocked after the passage is performed, «passage with withdrawal of identificator № … in direction…» event will be generated, indicators will display ACM «Control» (Sect. 11.2). If server sends «block direction…» command or RC STOP button is pushed before the passage is performed - OD will be blocked, «passage denial by the server command with withdrawal of identificator №...
  • Page 36 C-01 Controller Indication for readers that use Wiegand interface is given in Tables 4 and 5: Table 4. Indication of readers with one two-colored indicator double line Controller status single line Sound (sec.) Green Lost server connection 5 hz in antiphase...

  • Page 37: Troubleshooting

    12 TROUBLESHOOTING The elimination of possible malfunctions listed below is made by the buyer. If the fault persists, we recommend you to contact one of the service centers of PERCo company. A list of service centers is given in the Certificate.
  • Page 38 If the controller does not detect connection to Ethernet network (light indicators are off), connect it to the cable that connects the other controller or computer. If the controller still does not detect connection to Ethernet network or the communication is not reestablished, contact PERCo service in order to repair this controller.

  • Page 39: Maintenance

    Assembly & Operation Manual 13 MAINTENANCE It is necessary to perform technical maintenance of the controller. Periodicity of technical maintenance shall be provided according to the regulation №1 (see Table 6) – once per six months. In case of failures - the execution of maintenance work should be done after failures have been fixed.

  • Page 40: Transportation And Storage

    C-01 Controller 14 TRANSPORTATION AND STORAGE The controller in the original package should be transported in closed freight containers or in other closed type cargo transport units. The storage of the controller is allowed indoors at ambient temperature from -20°C to...

  • Page 41: Appendix 1. Instruction On Connection Of Alcohol Detector

    Assembly & Operation Manual APPENDICES Appendix 1. Instruction on connection of alcohol detector It is possible to connect to the controller the alcohol detection device (hereinafter breathalyzer) to monitor the temperance of employees and visitors when they enter and/or leave the company (one breathalyzer is for one direction of passage). Operation of the controller with the breathalyzer is possible only after configuring inputs in Web-interface or in a third-party SW.
  • Page 42 C-01 Controller Figure 20. Connection scheme of the breathalyzer...

  • Page 43: Appendix 2. Instruction On Connection Of The Controller Through Poe-Splitter

    Important: For some models of splitters output voltage is chosen with the switcher. Operating with PERCo equipment it is necessary to turn the switcher into “12V” mode. Requirements for connecting devices The characteristics of power consumption of the controller when connected through splitter shall meet the following requirements: Admissible value of supply voltage, V .............
  • Page 44 C-01 Controller Procedure of controller connection Cables used in installation are mentioned in Table 2. When you connect the controller through the splitter, follow the next procedure: 1. Find the mounting place of the splitter. It is recommended to install the splitter inside of controller housing (do not install the splitter from the controller at distance more than 2m).

  • Page 45: Appendix 3. C-01 Controller Web-Interface. User Manual

    User Manual Appendix 3. C-01 Controller Web-interface. User Manual CONTENTS CONNECTION TO WEB-INTERFACE OF THE CONTROLLER........45     SETTING ........................46     2.1. Change of network setting of the controller ............46     2.2. Change of server IP-address and encryption parameters ........46  ...

  • Page 46: Connection To Web-Interface Of The Controller

    On the page, you can select following: 1. The title bar if he page contains PERCo trademark and buttons to select the language of Web-interface. By clicking on the PERCo company logo you navigate to the main page from other sections of Web-interface.

  • Page 47: Setting

    User Manual 2. SETTING 2.1. Change of network setting of the controller The controller has following configurations by default (they are specified in the certificate of the device and on the labels on the controller):  MAC-address 00-25-0B-xx-xx-xx, where xx – is a number from 00 to FE; ...

  • Page 48: Setting Of The Access Password Of The Controller

    C-01 Controller Web-Interface 2.3. Setting of the access password of the controller By default, access password of the controller is not specified. To change or set the new password: 1. Click in the Web-interface menu: Parameters → Password. The page with working area will be opened: 2.

  • Page 49: Configuration Of The Settings Of The Controller Resources

    User Manual 3.2. Configuration of the settings of the controller resources 3.2.1. Operating devices To configure settings of the controller resources to control OD: 1. Click consistently in the Web-interface menu: Configuration → Edit → Operating devices. The page with working area will be opened: 2.
  • Page 50 C-01 Controller Web-Interface Inputs and outputs that are not involved in the selected configuration template are not listed by default in the list of physical contacts, but they are available for adding to the list and further adjusting their parameters.

  • Page 51: Readers

    User Manual 3. In the opened window make necessary changes of the settings:  the Contact selector contains the name of the physical contact in accordance with its designation on the controller board;  the Function selector sets the function of the contact; ...
  • Page 52 C-01 Controller Web-Interface 2. To change the parameters of the reader or to delete it from the list, click in the working area of the page on the line with its name, to add the reader in the list click the Add button.

  • Page 53: The Reading Format Of The Card Identifiers

    User Manual 3.2.4. The reading format of the card identifiers To set internal responses of the controller: 1. Click consistently in the Web-interface menu: Configuration → Edit → Internal responses. The page with working area will be opened: 2. To add the new response, click the Add button, to change the settings of internal response or delete it, click in the working area of the page on the line with the response name.

  • Page 54: Control Of Operating Device

    C-01 Controller Web-Interface 4. CONTROL OF OPERATING DEVICE To control the operating device and change the operation mode in the direction with associated reader, make following: 1. Click in the Web-interface menu: OD control. The page with working area will be opened: 2.

  • Page 55: Firmware Upgrade

    User Manual 6. FIRMWARE UPGRADE To update the firmware of the controller: Click in the Web-interface Service menu. The page with working area will be opened: 2. To update the firmware of the controller, on the Update firmware line, click Overview for the location of the firmware file and click the Upload button.

  • Page 56: Upgrading Keys For Encryption Of Incoming Connection

    C-01 Controller Web-Interface 7. UPGRADING KEYS FOR ENCRYPTION OF INCOMING CONNECTION To update encryption keys: 1. Click in the Web-interface Service menu. A page with working area will be opened: 2. To update the encryption keys, use in the "Update HTTPS key" line the Overview button to locate the keys file and click the Upload button.
  • Page 57 PERCo Polytechnicheskaya str., 4, block 2 194021, Saint Petersburg Russia Tel: +7 812 247 04 64 E-mail: export@perco.com support@perco.com www.perco.com...
  • Page 58 www.perco.com...

Table of Contents