Figure 6-6: 923-Gui - Alarm Configuration - Focal 923 User Manual

6.2.4.4 Alarm Configurations
The GUI includes alarm levels for measured values. These alarm levels are configurable by the user in the
alarms window shown in the figure below. Unsaved values are highlighted and current alarm levels can be
restored at any point. The GUI provides the user the ability to change alarms, save alarm configurations as a
.csv file, and upload previously saved alarm configuration files.
The default alarm levels used on GUI start-up are saved in a configuration file stored in the same directory as
the run file. The file containing the alarm levels can be edited in a text editor or Excel so that the same alarm
levels are loaded on each startup. The configuration file must be saved in .csv format.
Alarm settings are saved in the local computer and are only applicable to the GUI – not the 923-EDL card.
Any changes to the alarm values will only be reflected in the GUI, the 923 card will continue to operate
normally regardless of the software alarm settings.
Focal Technologies Corporation
A Moog Inc. Company
Figure 6-6: 923-GUI – Alarm Configuration
Model 923 Data Logger – User Manual
Document No: 923-0603-01, Rev. 2
Page 6-9