Dry Vacuum Cleaning - LG VP0716WNVQD Owner's Manual

tank.
3.10. Fit the required accessory to the
base of the extension tube or hose.
Fit the air diffuser handle.Connect
the suction hose.(fig.10)

4. DRY VACUUM CLEANING

WARNING! Ensure you read,
understand and apply Section 1
'Safety Instructions'.
Reminder: DO NOT vacuum
hazardous substances. Use of an
incorrect dust bag will invalidate
your warranty.
4.1. Ensure the machine is unplugged
from the power supply.
4.2. Re-usable filter. Ensure it is clean
and dry. Place the re-usable filter
over
the valve basket and adjust. Correct
adjustment requires the ring to hold
the re-usable filter snug against the
ribs of the top section.
4.3. Be sure the re-usable filter
completely covers the filter basket.
Also check to ensure that all edges
of the re-usable filter are secure
under the mounting ring.
4.4. Dust Bag. Pull the dust bag flange
over the inlet stub, taking care not
to damage the bag.
4.5. Re-position the head onto the tank,
and clip in place.
4.6. Insert the larger end of the flexible
hose into the front inlet on the tank
and lock in place. Push the required
attachment onto the free end of
the hose.
4.7. Plug in the power supply .
4.8 Switch the motor to vacuum only
(position:
4.9 . When you have completed
vacuuming, turn the switch to
'Off'. (position 'I'), and unplug
from power supply. Regularly
check the dust bag and dispose of
safely when it is 2/3 full. The bag is
manufactured so that only air, not
dust, will pass through the paper
and as such the dust bag must not
be re-used.
DO NOT use the dust bag and re-usable
filter for wet or sharp materials.
7
.)