Table of Contents
Advertisement
1. Packing and transport
Strictly comply with the indications on the
pictograms and the instructions on the
packaging.
The packaging for GSec switch-disconnectors consists
of a wooden pallet (L1200xD800xH700) and a twin-board
cardboard box with polyethylene shells (PE) for protection.
A plastic covering protects the switch-disconnector from dust
during the period it remains in storage.
Up to three switch-disconnectors can be stacked on top of
each other. The surface of the loading platform must be non-
slip with a high coefficient of friction.
The platform must be fitted with frame members so as to
prevent the units from shifting either longitudinally or cross-
wise.
The units must be fastened to the structure of the vehicle with
ropes to avoid damage and prevent them from tipping over
when the transport vehicle is driven round bends or is sharply
braked.
The vehicle must also be covered with a tarpaulin.
4
2.
Checking on receipt
Unload the switch-disconnectors from the vehicle with the
utmost care, as described in chap. 4. Immediately check
the condition of the packaging as soon as the switch-
disconnectors arrive. Make sure that the apparatus is
undamaged and that the data on the nameplate on the
outside of the packaging (see fig. 1) correspond to the
information in the order confirmation and shipping note.
If damage or discrepancies are discovered, or the documents
supplied with the goods fail to correspond, immediately inform
ABB (either directly, or through your representative or supplier)
and the haulage contractor that made the delivery.
The switch-disconnectors are supplied solely with the
accessories specified at the time of order and validated in the
order confirmation.
Hide quick links:
Advertisement
Table of Contents
