Packing And Transport - ABB hd4 Installation And Service Instructions Manual

1.

Packing and transport

The circuit-breaker is shipped in special packing in the open
position with the springs discharged and with absolute pole
pressure corresponding with the service value.
Each piece of apparatus is protected by a plastic film to
prevent any infiltration of water during the loading and
unloading stages and to keep the dust off during storage.
Handling and transport must only be carried out by expert
and properly trained personnel.
Do not remove or alter the switch identification contents and
labels.
Switches subject to UN3164 standards for transportation by
air and / or sea.
Safety data sheet: 1VCD850182
5