Panasonic CX-400 Series Instructions Manual page 9

Compact photoelectric sensor
Hide thumbs Also See for CX-400 Series:
Table of Contents

Advertisement

Basic types
Item
NPN output
CX-411A-C05
PNP output
CX-411A-P-C05
Sensing range
Object to be sensed
Repeatability
(perpendicular to sensing axis)
Supply voltage
Current consumption
• NPN or PNP open-collector transistor
• NPN: Maximum sink current: 100mA; PNP: Maximum source current: 100mA
• Applied voltage: 30V DC or less (NPN: between output and 0V; PNP: between output and +V)
Output
• Residual voltage:
Short-
circuit
protection
Response time
By mounting interference prevention filters, two sets of the sensors can be
Automatic
mounted close together. For details, see page 5, section 10, INTERFERENCE
interference
PREVENTION FILTERS.
prevention function
Protection
Ambient temperature
Ambient humidity
Emitting element
Material
Cable
Net
Gross
*1
The retroreflective type sensor with polarizing filters may not stably detect specular or glossy objects through transparent film since light is polarized by the
transparent film. For details, see page 5, section 8, RETROREFLECTIVE TYPE SENSOR WITH POLARIZING FILTERS.
*2
The sensing range and the sensing object for the retroreflective type sensor is specified for the RF-230 reflector. For more detailed information, please refer
to the
CX-400 Series User's
Manual. After installation, be sure to check operation under actual conditions.
Ramco National
Light-ON
Dark-ON
CX-411B-C05
CX-411B-P-C05
10m
12mm or more opaque object
Emitter: 15mA or less
Receiver: 10mA or less
NPN: 2V or less (at 100mA sink current), 1V or less (at 16mA sink current)
PNP: 2V or less (at 100mA source current), 1V or less (at 16mA source current)
-25 to +55°C (No dew condensation or icing allowed), Storage: -30 to +70°C
Red LED
2
0.2mm
3-core (thru-beam type sensor emitter: 2-core) cabtyre cable, 2m long
Emitter: approx. 20g ; Receiver: approx. 20g
Thru-beam
Light-ON
CX-412A-C05
CX-412A-P-C05
CX-412B-P-C05
15m
0.5mm or less
12 to 24V DC ±10% Ripple P-P 10% or less
Emitter: 20mA or less
Receiver: 10mA or less
NPN or PNP output type
Incorporated
1ms or less
IP67 (IEC)
35 to 85% RH, Storage: 35 to 85% RH
Infrared LED
Enclosure: PBT, Lens: Acrylic, Indicator cover: Acrylic
Approx. 50g
9
www.PanasonicSensors.com
Dark-ON
Light-ON
CX-412B-C05
CX-491A-C05-Y
CX-491A-P-C05-Y
50mm or more opaque, translucent
or specular object
*1
Retroreflective
Dark-ON
CX-491B-C05-Y
CX-491B-P-C05-Y
*2
3m
*2
13mA or less
Incorporated
Red LED
Approx. 20g
Approx. 30g
1-800-280-6933

Advertisement

Table of Contents
loading

Table of Contents