Table of Contents
Advertisement
Editing the program
While playback is stopped...
1
Select the program number of the track you want
to replace
Press [PRGM] to display the program setting screen, and press [ 5 ]
[ ∞ ] [ 2 ] [ 3 ].
• To add a track at the end of the program, move the cursor to the
last program number.
2
4
Perform step
in the left column to select a new
track
• To erase a programed track, press the number button [0] a few times.
• To erase the entire program, press [ 7 ].
Playing still picture (JPEG file)
• No audio signal of other source is emitted during still picture playback.
1
Select still picture for the file type
Press [ 2 ] [ 3 ] repeatedly to select still picture for file type on the
control screen (refer to page 14), and press [ENTER].
The files of still picture are listed on the control screen.
2
Select a file in the list
The thumbnail of the selected file is
displayed on the control screen.
• You can also select a file using the number buttons. (To select a
number, refer to page 6.)
• To select a folder, press [ 2 ] to move the cursor to the folder list,
and press [ 5 ] [ ∞ ] and then [ENTER].
3
Start playback
Slide-show playback starts. Playback stops automatically after all
pictures contained on the disc/USB mass storage class device/SD
card have been played.
• Playback also starts by pressing [DVD/CD 6 ], [USB 6 ] or
[SD 6 ].
• Repeat play or Random play can also be used for still pictures.
(Refer to pages 15 and 16.)
• To pause slide-show playback, press [DVD/CD 6 ], [USB 6 ], or
[SD 6 ].
• To cancel slide-show playback and select the file manually, press
[ 4 ] [ ¢ ].
Reflecting or rotating images
During playback of the still picture or while playback is paused...
The image reflects
5
[
]
vertically.
The image reflects
∞
[
]
horizontally.
• Press [ENTER] to return to the normal display. The slide-show playback
starts again.
17
The image rotates to left
2
[
]
by 90 degrees.
The image rotates to right
3
[
]
by 90 degrees.
Advertisement
Table of Contents
