Table of Contents
Advertisement
Playback operations
To play a USB mass
To play a disc
storage class device
To pause a disc
To pause a USB mass
storage class device
To pause an SD card
To select a track
To fast-forward a track
To fast-reverse a track
To select a group
(MP3/WMA/JPEG only)
To stop playback
• To restore normal playback, press [ 6 ] for the target source (DVD,
USB, SD).
To play an SD card
Press [DVD/CD 6 ] during playback
Press [USB 6 ] during playback
Press [SD 6 ] during playback
Press [ ¢ ] or [ 4 ]
• To start playback from the desired
track, press the number button. (To
select a number, refer to page 6.)
Press and hold [ ¢ ]
• The search speed changes as x2, x4,
x8, x20.
Press and hold [ 4 ]
• The search speed changes as x2, x4,
x8, x20.
Press [ 2 ] or [ 3 ]
Press [ 7 ]
Resume play
This unit stores the stopped point. When you start playback again, it
starts from the stopped point.
During playback...
Press [ 7 ] once
• To clear the stored track (or chapter), press [ 7 ] while "RESUME" is
displayed.
Displaying the on-screen bar
Ex.: DVD Video
You can check the source information and playback status using the
on-screen bar.
Title (1/7) / Chapter (1/06) (current /total number)
/
Track (1/26) (current/total number in the folder)
Playback time indication
Audio language / Subtitle language
/
Angle
Audio format
/
Repeat mode
Playing back a disc with PBC (VCD/SVCD)
• To remove the on-screen bar, press [ON SCREEN] repeatedly.
13
Advertisement
Table of Contents
