Playing Dvd/Cd/Usb/Sd; Placing A Disc; Connecting A Usb Mass Storage Class Device; Inserting An Sd Card - JVC NX-PB15V Instructions Manual

Dvd prtable system

Table of Contents

Playing DVD/CD/USB/SD

Pull the display panel of the main unit down forward then place a disc

into the holder.

• When opening or closing the display panel, support the unit by hand

to prevent it from falling down.

• When placing a disc, be sure to place a disc with the label side facing

forward.

• Close the display panel before you start playback.

• "NO DISC" appears when no disc is placed to the unit.

• When placing or removing a disc, take enough care not to touch the

pickup lens.

• Do not open the display panel during playback; otherwise, the

rotating disc may hurt your fingers, etc.

Caution for the monitor of the main unit

• When opening or closing the display panel, open it slowly not to

damage the monitor by hitting it to the table or floor.

• Refer to page 24 for more about connecting a USB mass storage class

device.

Compatible USB device

You can connect only USB mass storage class devices which stores

audio files using Microsoft® Windows Media Player®.

It is impossible to connect the Digital Audio Player which stores the

audio file using any other application than the above.

Label side

• When removing the SD card, push it in and then pull it out.

• Refer to page 25 for more about inserting an SD card.

You cannot send any data to the disc, USB mass storage class

device, or SD card from the unit.

Table of Contents