V
BURNER COVER
FP2221
1
INSTALLATION
1. Carefully unpack all items from the box. Place the base in the final position. There must be
a minimum of 24 in / 60.96 cm of clearance from the side of the table top to any combustible
walls.
2. Attach the bottom frame to the two side panels and the back panel by using six 1/4"x30 mm
bolts and washers as shown in Figure 2a. Guide the bolts through the holes in the bottom
frame, into the pre-drilled holes in two side panels and the back panel. Do not over tighten.
Repeat for the top frame as shown in Figure 2b.
Figure 2a
Figure 2b
3. Place the tabletop onto the firepit base. Secure the tabletop to the firepit base by using the
four 1/4"x20 mm bolts and washers that are provided. See Figure 3.
Figure 3
6