Safety Instructions; Laser Safety Warnings - Scandlight DJ LED Diamond User Manual

Table of Contents

Advertisement

Safety Instructions

Safety Instructions
To protect the environment, please try to recycle the packing material as much as possible.
The projector is for indoor use only, IP20. Use only in dry locations. Keep this device away from rain and
moisture, excessive heat, humidity and dust. Do not allow contact with water or any other fluids, or metallic
objects
Don't throw this product away just as general trash, please deal with the product follow the abandon
electronic product regulation in your country.
Locate the fixture in a well ventilated spot, away from any flammable materials and/or liquids. The fixture
0.2m
must be fixed at least 20cm from surrounding walls
To avoid condensation to be formed inside, allow this unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport.
Condense sometimes prevents the unit from working at full performance or may even cause damages
Don't install it on flammable object.
Don not use it when maximum ambient temperature is higher than 40 degree,
Unplug the unit when it is not used for a longer time or before replacing the bulb.
Don't open the top cover to avoid unit damage.
Please use the original packing when the device is to be transported.
Never expose the lens to direct sunlight, even for a short period, This may damage the light effect or even
cause fire!

Laser Safety Warnings

According to EN 60825-1:2007, this product belongs to class 3R. Direct
eye contact may cause injury.
This product is for laser show only. The class 3R laser light should be operated by
professional operator only.
This is so-called show laser, emitting radiation with a wavelength spectrum between 400 and 700nm and
producing lighting effects for shows.
International laser safety regulations require that the vertical height from installment to ground is more than
3 meters, horizontal distance is 2.5 meters from audience.
Never direct the laser beam to people or animals and never leave this device running unattended.
The legal requirements for using laser entertainment products vary from country to country. The user is
responsible for the legal requirements at the location/country of use.
Warning! Avoid direct eye contact with laser beams during operation, especially when the laser beams
stay still, or injury to eyes may occur.
Laser Safety Protection Feature
Caution!The laser security measures are designed according to the specific terms of the relevant
international laser safety standards and has the following laser safety protection means.
Laser key switch: laser is available only when the key is turned on.
Laser Emergency switch: remote connecting switch,it will cut off the laser light path emergently once the device in
potential hazard;
Laser safety label
The labels of according with European standard are sticked on the device body.
2

Advertisement

Table of Contents
loading

Table of Contents