Dynex DX-DGPK03 Quick Setup Manual

DX-DGPK03
Ultimate Accessory Kit for GoPro
FEATURES
• Compatible with most GoPro cameras
• Perfect for capturing hiking, biking, rock climbing, skiing,
snowboarding, boating, swimming, and other activities
PACKAGE CONTENTS
• Assorted accessories (see table)
Note: Place your GoPro inside its housing (included with or attached
to your GoPro, not included with this kit) to mount with these
accessories.
• Quick Setup Guide
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
ITEM DESCRIPTION
Safety cable Use in any situation where you risk losing your GoPro if it falls (for
example, while boating or biking). Connect directly to your GoPro and
a fixed object such as a boat railing, sideview mirror, or other suitable
location.
Note: Do not attach safety cable to your body, clothing, or safety gear.
Head strap mount Attach your Go Pro using the thumb screw. Adjust the head strap
mount to fit comfortably and securely.
Chest strap mount Push the surface J-hook into the grooves on the chest mount until it
clicks into place, then attach your GoPro using the thumb screw. Adjust
the chest straps to fit comfortably and securely.
Note: To remove, press the buckle on the J-hook, then slide it out.
Wrist strap mount
Attach your GoPro using the thumb screw. Adjust the strap to securely
fit your arm, leg, or other object.
Handlebar mount
To attach to bike handlebars, ski poles, and other objects, loosen the
handlebar mount's thumb screws, align the mount where you want to
attach it, then tighten the screws. Use one of the two adapters to
rotate your GoPro 90 degrees.
ITEM DESCRIPTION
Adhesive mount set Clean and dry the mounting surface. Remove one side of the adhesive
backing and press firmly onto the back of the mount, remove the other
side of the adhesive back, press firmly on the mounting surface, then
wait 24 hours. Attach your GoPro to the surface J-hook, surface quick
release buckle, or 3-way adjustable pivot arm, then slide it into the
adhesive mount.
Car suction cup mount
To attach to cars, boats, or other vehicles, screw the tripod mount
adapter into the mount holder, then attach your GoPro using the
thumb screw. Press the suction cup to your vehicle's surface, then push
down the lock.
Note: Attach the safety cable to prevent your GoPro from falling off.
Adjustable car suction cup
To attach to cars, boats, or other vehicles, attach your GoPro to the
mount surface quick release buckle, or surface J-hook, or 3-way adjustable
pivot arm, then attach it to the mount. Press the suction cup to your
vehicle's surface, then push down the lock.
Note: Attach the safety cable to prevent your GoPro from falling off.
Flexible tripod Attach your GoPro to the tripod mount adapter, then screw it onto the
tripod. Stand the tripod upright or wrap the foam legs around objects
for better placement.
ITEM DESCRIPTION
Floating handle grip Use as a short handle for filming or to keep your GoPro afloat in water.
Put your GoPro into a waterproof housing (not included), then attach it
to the floating handle grip using the thumb screw.
Extendable handle Attach your GoPro to the monopod with the thumb screw to capture
monopod striking perspectives, individual shots, or group shots. Twist to loosen
the monopod, pull to extend it to the desired length you want, then
twist again to secure.
Note: DO NOT force the monopod open or closed. It will slide freely when
properly loosened.
Use with the flexible tripod, car suction cup mount, or any other
Tripod mount adapter
standard tripod that you own.
Quick release tripod mount Use to quickly attach and remove your GoPro while using the flexible
adapter
tripod or other support systems. Attach your GoPro to the surface quick
release buckle, surface J-hook, or 3-way adjustable pivot arm, then
attach it to the quick release tripod mount adapter.
Surface J-hook
Use with the chest mount, adhesive mount set, adjustable car suction
cup mount, or quick release tripod mount.