aoyue Int950 Instruction Manual

Smd hot tweezers

Advertisement

Quick Links

This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
The specific instructions related to the safe operation of this appliance (as given
in 7.12 of this standard) shall be collated together in the front section of the user
instructions.
The height of the characters, measured on the capital letters, shall be at least 3
mm.
These instructions shall also available in an alternative format, e.g. on a website.
A fire may result if the appliance is not used with care, therefore:
be careful when using the appliance in places where there are combustible
materials ;
do not apply to the same place for a long time;
do not use in presence of an explosive atmosphere;
be aware that heat may be conducted to combustible materials that are out
of sight;
place the appliance on its stand after use and allow it to cool down before
storage;
do not leave the appliance unattended when it is switched on.
Rohs
Correct Disposal of this product
This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take
this product for environmental safe recycling.
Manufacturer:
AOYUE INTERNATIONAL LIMITED
Jishui Industrial Zone, Nantou, Zhongshan City,
Guangdong Province, P.R.China
http://www.aoyue.com
Int950 / Int950+
SMD HOT TWEEZERS
Instruction Manual
Thank you for purchasing Aoyue Int950 / Int950+
temperature controlled soldering station.
Please read the manual before using the unit.
Keep manual in accessible place for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Int950 and is the answer not in the manual?

Questions and answers

Summary of Contents for aoyue Int950

  • Page 1 → Rohs Thank you for purchasing Aoyue Int950 / Int950+ temperature controlled soldering station. Correct Disposal of this product Please read the manual before using the unit. This marking indicates that this product should not be disposed Keep manual in accessible place for future reference.
  • Page 2 REPLACEMENT SOLDERING TIPS...
  • Page 3 BASIC TROUBLESHOOTING GUIDE PROBLEM 3: SOLDERING IRON TEMPERATURE IS INTERMITTENT Description: Main power LED lights up and so does the heater LED but TABLE OF CONTENTS soldering iron temperature rises and falls uncontrollably. SOLUTION: Package Contents and Specifications……………….. 4 Soldering iron plug may be loose from the receptacle unplug the ◆...
  • Page 4: Basic Troubleshooting Guide

    Please check if the listed parts below are included in the package: WARNING: To avoid personal injury or equipment damage, disconnect power cords before making any servicing to the Aoyue 950 equipment, or unless instructed otherwise in the 950 Main Station .
  • Page 5 CARE and SAFETY PRECAUTIONS REPLACING SOLDERING IRON CORD /FUSE When cord is proven to be faulty follow the steps to replace the cord: CAUTION: Misuse may cause injury and physical damage. Follow the steps in disassembling the hand piece. For your own safety, be sure to comply with the following precaution. Make a brief illustration of wire configuration in the PCB.
  • Page 6 ASSEMBL Y INSTRUCTIONS TROUBLESHOOTING CONNECTIONS I. SOLDERING IRON HOLDER The 5 pin socket can be tested to detect faults in the hand piece: 1. Dampen the cleaning sponge with water, squeeze it dry and place Before plugging in the hand piece conduct the Pins 4 &...
  • Page 7 TESTING THE HEATING ELEMENT OPERATING INSTRUCTIONS To test if the heating element is in working condition: Follow procedures shown in the “Assembly Instructions”. Cool down assembly to room temperature before continuing the tests Turn on the unit. below: Turning the control knob clockwise increases the desired (SET) Follow “disassembling the hand piece”...
  • Page 8 SOLDER TIP CARE and MAINTENANCE HAND PIECE ASSEMBL Y The hand piece may be disassembled for troubleshooting and Tip Temperature repair: If the tip temperature is too high, it decreases the life of the tip. So Turn off main station and unplug from power source. we suggest you to use the lowest *possible* tip temperature when 15”...

This manual is also suitable for:

Int950 plus

Table of Contents