VTech DM223 User Manual page 2

Set default
General product care
Use this feature to restore to the default settings.
Restoring the default settings on one parent
To keep this product working well and looking good,
unit will also reset the shared settings for VOX
follow these guidelines:
sensitivity level of the other parent unit.
• Avoid putting it near heating appliances and devices
1. Press MENU when the parent unit is not in
that generate electrical noise (for example, motors
use.
or fluorescent lamps).
2. Press VOL. or VOL. to choose
• DO NOT expose it to direct sunlight or moisture.
SET DEFAULT, then press SELECT.
•
Avoid dropping the product or treating it roughly.
3. Press VOL. or VOL. to choose YES or
•
Clean with a soft cloth.
NO.
• DO NOT immerse the parent unit and the baby
4. When you choose YES, press SELECT to
unit in water and do not clean them under the tap.
confirm your selection. The screen displays
•
SAVED and you hear a confirmation tone. DO NOT use cleaning spray or liquid cleaners.
•
Make sure the baby unit and parent unit are dry
-OR-
before you connect them to the mains again.
When you choose NO, press SELECT to
confirm your selection. The screen displays the
Storage
previous menu.
Talk to the baby unit
When you are not going to use the baby monitor for
You can broadcast messages from a parent unit to
some time, remove the rechargeable battery from the
the baby unit and the other parent unit. If you have
parent unit. Store the parent unit, the baby unit and
two parent units, you can use both of them at the
the adapters in a cool and dry place.
same time to talk to the baby unit.
• Press and hold TALK on the side of the
parent unit. The screen displays TALK when
the voice connection to the baby unit is
made. Speak towards the MIC on the parent
unit. Your voice is broadcast to the baby unit
and the other parent unit.
NOTES
• When a parent unit is talking to the baby unit, it is
also broadcast to the other parent unit. However,
sounds from the baby unit cannot be transmitted
to the parent units at the moment.
• If speaker volume of the parent unit has been
turned off before the talk, it will change to default
volume level after the talk finished.
Find/page the parent unit
Use this feature to find misplaced parent units.
1. Press PAGE on the baby unit. All idle parent
units ring and display PAGING.
2. To end paging, press any key on the parent
unit, or press PAGE on the baby unit.
NOTES
• Paging rings all parent units even if the speaker
volume of parent unit is set to VOLUME OFF.
• The baby unit cannot page any parent unit that is
turned off, out of range or talking to the baby unit.
The term ''IC:'' before the certification/registration
Limited warranty
number only signifies that the Industry Canada
technical specifications were met.
This product meets the applicable Industry Canada What does this limited warranty cover?
technical specifications. The manufacturer of this VTech Product warrants to
the holder of a valid proof of purchase ("Consumer" or
RF radiation exposure statement
"you") that the Product and all accessories provided in
The baby unit complies with FCC RF radiation
the sales package ("Product") are free from defects in
exposure limits set forth for an uncontrolled
material and workmanship, pursuant to the following
environment. The baby unit should be installed and
terms and conditions, when installed and used
operated with a minimum distance of 8 in (20 cm)
normally and in accordance with the Product operating
between the baby unit and all persons' body. Use of
instructions. This limited warranty extends only to the
other accessories may not ensure compliance with
Consumer for Products purchased and used in the
FCC RF exposure guidelines. This transmitter must
United States of America and Canada.
not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment complies What will VTech do if the Product is not free from
also with Industry Canada RSS-102 with respect to defects in materials and workmanship during
Canada's Health Code 6 for Exposure of Humans to the limited warranty period ("Materially Defective
RF Fields. Product")?
During the limited warranty period, VTech's authorized
service representative will repair or replace at
VTech's option, without charge, a Materially Defective
Product. If we repair the Product, we may use new
or refurbished replacement parts. If we choose to
replace the Product, we may replace it with a new or
refurbished Product of the same or similar design.
We will retain defective parts, modules, or equipment.
Repair or replacement of the Product, at VTech's
option, is your exclusive remedy. VTech will return the
repaired or replacement Products to you in working
condition. You should expect the repair or replacement
to take approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product extends
for ONE (1) YEAR from the date of purchase. If VTech
repairs or replaces a Materially Defective Product under
the terms of this limited warranty, this limited warranty
also applies to the repaired or replacement Product for
a period of either (a) 90 days from the date the repaired
or replacement Product is shipped to you or (b) the time
remaining on the original one-year warranty; whichever
is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse,
accident, shipping or other physical damage,
improper installation, abnormal operation or
handling, neglect, inundation, fire, water or other
liquid intrusion; or
2. Product that has been damaged due to repair,
alteration or modification by anyone other than an
authorized service representative of VTech; or
3. Product to the extent that the problem experienced
is caused by signal conditions, network reliability, or
cable or antenna systems; or
4. Product to the extent that the problem is caused by
use with non-VTech accessories; or
5. Product whose warranty/quality stickers, product
Frequently asked questions Why don't I The volume of the parent unit
hear a sound/ may have set too low. Press
Why can't I hear VOL. to increase the volume
Below are the questions most frequently asked about
my baby cry? level.
the baby monitor. If you cannot find the answer to your
You may have set a low VOX
question, visit our website at www.vtechcanada.com
sensitivity level. See Adjust
or call 1 (800) 267-7377 for customer service.
the Voice-activated (VOX)
Why does the Try the following (in the order sensitivity level of the baby unit
baby monitor listed) for common cure: to change the setting.
not respond
1. Disconnect the power to the
Why does the If the sound alert feature is on,
normally?
baby unit and the parent units.
parent unit there is sound detected from the
2. Remove the batteries in the
beep? baby unit.
parent units. Then, install the
batteries again. The baby units may be out of
range. Move the parent unit
3. Wait a few minutes before
closer to the baby units (but not
connecting power back to the
baby units and the parent unit. less than 6.5 feet).
4. Turn on the baby unit and the
If the parent unit is powered
parent units.
by the provided battery, it may
5. Wait for the parent units to
not have enough charge for the
synchronize with the baby unit.
parent unit to perform normally.
Allow up to one minute for this
Charge the battery in the parent
to take place.
unit for up to 11 hours.
Why doesn't Perhaps the rechargeable battery
Why can't I The baby units may be out of
the screen of
of the parent unit is empty and the
establish a range. Move the parent unit
the parent unit
parent unit is not connected to the
connection? closer to the baby units (but not
go on when I
power. Insert the appliance plug
Why is the less than 6.5 feet).
switch on the
into the parent unit and put the
connection lost
unit? Other electronic products may
adapter in a wall socket.
every now and
cause interference with your baby
then? Why are
monitor. Try installing your baby
there sound
Why doesn't the Perhaps the baby unit is not monitor as far away from these
interruptions?
POWER light connected to the power. Connect electronic devices as possible.
of the baby unit the baby unit to the power.
go on when I
switch on the
Important safety
unit?
Why does the The units may be too close to instructions
baby monitor each other. Make sure the parent
produce a unit and the baby unit are more
When using your equipment, basic safety
high-pitched
than 2 meters (6.5 feet) away from
noise? precautions should always be followed to
each other.
reduce the risk of fire, electric shock and injury,
Why does the The baby unit also detects other
including the following:
parent unit react sounds than those of your baby.
1. Follow all warnings and instructions marked
too quickly to Adjust the VOX sensitivity level
on the product.
other sounds? to a lower level or adjust the
speaker volume on the parent 2. Adult setup is required.
unit.
3. This product is intended as an aid. It is not
a substitute for responsible and proper adult
supervision and should not be used as such.
4. This product is not intended for use as a
medical monitor.
5. Do not use this product near water. For
example, do not use it next to a bath tub, wash
bowl, kitchen sink, laundry tub or swimming
pool, or in a wet basement or shower.
6. CAUTION: Use only the batteries indicated in
this manual. There may be a risk of explosion
if a wrong type of battery is used for the parent
serial number plates or electronic serial numbers State/Provincial Law Rights: This warranty gives you
have been removed, altered or rendered illegible; or specific legal rights, and you may also have other rights,
6. Product purchased, used, serviced, or shipped for which vary from state to state or province to province.
repair from outside the United States of America
Limitations: Implied warranties, including those of
or Canada, or used for commercial or institutional
fitness for a particular purpose and merchantability (an
purposes (including but not limited to Products
unwritten warranty that the Product is fit for ordinary
used for rental purposes); or
use) are limited to one year from the date of purchase.
7. Product returned without a valid proof of purchase
Some states/provinces do not allow limitations on
(see item 2 on the next page); or
how long an implied warranty lasts, so the above
8. Charges for installation or set up, adjustment of
limitation may not apply to you. In no event shall
customer controls, and installation or repair of
VTech be liable for any indirect, special, incidental,
systems outside the unit.
consequential, or similar damages (including, but
not limited to lost profits or revenue, inability to use
How do you get warranty service?
the Product or other associated equipment, the cost
To obtain warranty service, please visit our website at
of substitute equipment, and claims by third parties)
www.vtechcanada.com or call 1 (800) 267-7377.
resulting from the use of this Product. Some states/
NOTE: Before calling for service, please review the
provinces do not allow the exclusion or limitation of
user's manual - a check of the Product's controls and
incidental or consequential damages, so the above
features may save you a service call. limitation or exclusion may not apply to you.
Except as provided by applicable law, you assume the Please retain your original sales receipt as proof
risk of loss or damage during transit and transportation
of purchase.
and are responsible for delivery or handling charges
incurred in the transport of the Product(s) to the
service location. VTech will return repaired or replaced
Product under this limited warranty. Transportation,
delivery or handling charges are prepaid. VTech
assumes no risk for damage or loss of the Product
in transit. If the Product failure is not covered by this
limited warranty, or proof of purchase does not meet
the terms of this limited warranty, VTech will notify you
and will request that you authorize the cost of repair
prior to any further repair activity. You must pay for
the cost of repair and return shipping costs for the
repair of Products that are not covered by this limited
warranty.
What must you return with the Product to get
warranty service?
1. Return the entire original package and contents
including the Product to the VTech service location
along with a description of the malfunction or
difficulty; and
2. Include a "valid proof of purchase" (sales receipt)
identifying the Product purchased (Product model)
and the date of purchase or receipt; and
3. Provide your name, complete and correct mailing
address, and telephone number.
Other limitations
This warranty is the complete and exclusive
agreement between you and VTech. It supersedes
all other written or oral communications related to this
Product. VTech provides no other warranties for this
Product. The warranty exclusively describes all of
VTech's responsibilities regarding the Product. There
are no other express warranties. No one is authorized
to make modifications to this limited warranty and you
should not rely on any such modification.
unit. Use only the supplied rechargeable battery 19.To reduce the risk of electric shock, do
or replacement battery pack (BT166342/ not disassemble this product, but take it to
BT266342) for the parent unit. Do not dispose an authorized service facility. Opening or
of batteries in a fire. They may explode. removing parts of the product other than
Dispose of used battery according to the specified access doors may expose you to
information in The RBRC seal. dangerous voltages or other risks. Incorrect
®
reassembling can cause electric shock when
7. Use only the adapters included with this
product. Incorrect adapter polarity or voltage the product is subsequently used.
can seriously damage the product. 20.You should test the sound reception every
Baby unit power adapter: Input 100-120V AC time you turn on the units or move one of the
150mA 60Hz; Output: 6V DC 400mA; components.
Parent unit power adapter: Input 100-120V
21.Periodically examine all components
AC 150mA 60Hz; Output: 6V DC 400mA. for damage.
8. The power adapters are intended to be
22.Be aware of possible loss of privacy while
correctly oriented in a vertical or floor mount using public airwaves. Conversations may
position. The prongs are not designed to hold
be picked up by other nursery monitors,
the plug in place if it is plugged into a ceiling,
cordless phones, scanners, etc.
under-the-table or cabinet outlet.
23.Children should be supervised to ensure that
9. For pluggable equipment, the socket-outlet
they do not play with the product.
shall be installed near the equipment and
24.The product is not intended for use by
shall be easily accessible.
persons (including children) with reduced
10.Unplug this product from the wall outlet physical, sensory or mental capabilities,
before cleaning. Do not use liquid or aerosol
or lack of experience and knowledge,
cleaners. Use a damp cloth for cleaning.
unless they have been given supervision or
11.Unplug the power cords before replacing instruction concerning use of the appliance
batteries. by a person responsible for their safety.
12.Do not cut off the power adapters to replace
SAVE THESE INSTRUCTIONS
them with other plugs, as this causes a
hazardous situation.
13.Do not allow anything to rest on the power
Cautions
cords. Do not install this product where the
1. Use and store the product at a temperature
cords may be walked on or crimped.
between 32 o F and 104 o F.
14.This product should be operated only from
2. Do not expose the product to extreme cold,
the type of power source indicated on the heat or direct sunlight. Do not put the product
marking label. If you are not sure of the type
close to a heating source.
of power supply in your home, consult your
3. Batteries should not be exposed to excessive
dealer or local power company.
heat such as bright sunshine or fire.
15.Do not overload wall outlets or use an
4. Make sure the baby unit(s) and the adapter
extension cord. cord(s) are always out of reach of the baby,
16.Do not place this product on an unstable at least 3 feet away from the baby or crib, to
avoid a possible strangulation hazard.
table, shelf, stand or other unstable surfaces.
5. Never place the baby unit(s) inside the
17.This product should not be placed in any
baby's crib or playpen. Never cover the baby
area where proper ventilation is not provided.
unit(s) or parent unit with anything such as a
Slots and openings in the back or bottom
towel or a blanket.
of this product are provided for ventilation.
6. Other electronic products may cause
To protect them from overheating, these
interference with your baby monitor. Try
openings must not be blocked by placing the
installing your baby monitor as far away
product on a soft surface such as a bed, sofa
from these electronic devices as possible:
or rug. This product should never be placed
wireless routers, radios, cellular telephones,
near or over a radiator or heat register.
intercoms, room monitors, televisions,
18.Never push objects of any kind into this
personal computers, kitchen appliances and
product through the slots because they may
cordless telephones.
touch dangerous voltage points or create a
short circuit. Never spill liquid of any kind on
the product.
Technical specifications
Frequency Crystal controlled PLL synthesizer
control
Transmit Baby unit: 1921.536-1928.448 MHz
frequency
Parent unit: 1921.536-1928.448 MHz
Channels 5
LCD 35 (x) x 21.2 (y) mm B&W LCD
Nominal Maximum power allowed by FCC
effective and IC. Actual operating range may
range vary according to environmental
conditions at the time of use.
Power Parent unit: 2.4 V Ni-MH battery
requirement
Baby unit power adapter:
Input: 100-120V AC 150mA 60Hz
Output: 6V DC 400mA
Parent unit power adapter:
Input: 100-120V AC 150mA 60Hz
Output: 6V DC 400mA
Precautions for users of implanted cardiac
FCC and IC regulations
pacemakers
Cardiac pacemakers (applies only to digital
cordless devices): FCC Part 15
Wireless Technology Research, LLC (WTR), This equipment has been tested and found to comply
with the requirements for a Class B digital device under
an independent research entity, led a
Part 15 of the Federal Communications Commission
multidisciplinary evaluation of the interference
(FCC) rules. These requirements are intended
between portable wireless devices and
to provide reasonable protection against harmful
implanted cardiac pacemakers. Supported by
interference in a residential installation. This equipment
the U.S. Food and Drug Administration, WTR
generates, uses and can radiate radio frequency
recommends to physicians that:
energy and, if not installed and used in accordance
Pacemaker patients with the instructions, may cause harmful interference
to radio communications. However, there is no
• Should keep wireless devices at least six
guarantee that interference will not occur in a particular
inches from the pacemaker.
installation. If this equipment does cause harmful
• Should NOT place wireless devices directly
interference to radio or television reception, which can
over the pacemaker, such as in a breast
be determined by turning the equipment off and on, the
pocket, when it is turned ON.
user is encouraged to try to correct the interference by
WTR's evaluation did not identify any risk to
one or more of the following measures:
bystanders with pacemakers from other persons • Reorient or relocate the receiving antenna.
using wireless devices. • Increase the separation between the equipment
and receiver.
Electromagnetic fields (EMF)
• Connect the equipment into an outlet on a circuit
This VTech product complies with all standards
different from that to which the receiver is connected.
regarding electromagnetic fields (EMF). If handled
• Consult the dealer or an experienced radio/TV
properly and according to the instructions in this
technician for help.
user's manual, the product is safe to be used based
Changes or modifications to this equipment not
on scientific evidence available today.
expressly approved by the party responsible for
compliance could void the user's authority to operate
the equipment.
The RBRC seal
®
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
The RBRC ® seal on the nickel-metal battery indicates
this device may not cause harmful interference, and
that VTech Communications, Inc. is voluntarily (2) this device must accept any interference received,
participating in an industry program to collect and
including interference that may cause undesired
recycle these batteries at the end of their useful lives,
operation.
when taken out of service within the United States and
To ensure safety of users, the FCC has established
Canada.
criteria for the amount of radio frequency energy
The RBRC ® program provides a convenient alternative that can be safely absorbed by a user or bystander
to placing used nickel-metal batteries into the trash or according to the intended usage of the product. This
municipal waste, which may be illegal in your area. product has been tested and found to comply with the
FCC criteria. The baby unit shall be installed and used
VTech's participation in RBRC ® makes it easy for you to
such that parts of all persons' body are maintained
drop off the spent battery at local retailers participating
at a distance of approximately 8 in (20 cm) or more.
in the RBRC ® program or at authorized VTech product
The transmitter and antenna of the parent unit shall be
service centers. Please call
held at least 1 in (2.5 cm) from your face.
1 (800) 8 BATTERY ® for information on Ni-MH battery
This Class B digital apparatus complies with Canadian
recycling and disposal bans/restrictions in your
requirement:
area. VTech's involvement in this program is part of
CAN ICES-3 (B)/NMB-3(B)
its commitment to protecting our environment and
conserving natural resources.
Industry Canada
RBRC ® and 1 (800) 8 BATTERY ®
This device complies with Industry Canada licence-
are registered trademarks of exempt RSS standard(s).
Rechargeable Battery Recycling
Operation is subject to the following two conditions: (1)
Corporation.
this device may not cause harmful interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation.
Specifications are subject to change without notice.
© 2017 VTech Technologies Canada Ltd.
All rights reserved. 11/17. DM223_CA_CIB_V4.0
Document order number: 91-009088-020-100