Customizing Optional Features - HDS Systems EDC Tactical User Manual

• Press-and-hold the button to select the current brightness level.
Your flashlight will display a dim-to-bright sequence to indicate you
are setting the brightness level. Release the button after your
flashlight turns off and your flashlight will return to the selected
preset with the newly selected brightness level.
• Note: your flashlight will exit the Brightness Menu with 5 rapid
flashes without changing the preset if an error is detected.
Possible errors include entering an unknown command, not
entering a command for 10 seconds and not holding the button
down until your flashlight turns off when selecting a brightness
level.
• Note: your flashlight will exit the Brightness Menu with 10 very
rapid flashes if there is insufficient power to memorize the setting.

14. Customizing Optional Features

Your flashlight offers the following optional features through the Option
Menu:
1. Swap Positions A and B
2. Automatic Turn Off
3. Button Lockout
4. Locator Flash
5. Pseudo Momentary
6. True Momentary
7. Burst
8. Menus
Follow these steps to enable or disable an optional feature from the
Option Menu:
• See Enabling Customization (section 11) to enable customization.
• Turn on your flashlight with the rotary control in the click on/off
position.
• Quad-press-hold-release. Your flashlight will display the indication
for the first menu item (Swap Positions A and B: <long flash, many
flashes>).
• Click to move to the next menu item.
direction and move to the previous menu item.
<long flash, many flashes>
<bright-to-dim ramp>
<triple-flash>
<dim flash>
<long flash, short flash>
<double-flash>
<brighter-dimmer>
<dim-to-bright ramp>
Double-click to reverse
14
The menu is