The signal can then be returned – with standard XLR male connectors. With low noise to the CELEUS 200 through a stereo line input channel. preamplifiers, these inputs serve for crystal clear sound replication.
25 auxiliary outputs for any means required. This control also dB. This should only be pushed adjusts the level of audio that is sent to the built-in digital in when using line-level input effect panel. devices. CELEUS 200...
Page 4
Headphone jack as well as the stereo Control Room USB audio player. outputs. The default signal for this mix is the main mix unless the "EFX TO MAIN" or "TAPE IN/USB TO MAIN" buttons are engaged. CELEUS 200...
Page 5
Bluetooth- enabled Smartdevice and the CELEUS. The bluetooth signal is fed through channel 3. Ensure the channel's "BT" button is engaged on this channel. The CELEUS 200 will appear as Phonic.BT in your device's bluetooth selection menu.
32/40-bit Digital Effect Processor 16 effects each with one adjustable parameter Power Requirement 100-240 VAC, 50/60 Hz External Dimensions (H x W x D) 87 x 250 x 341 mm (3.4” x 9.8” x 13.4”) Weight 1.69 kg (3.7 lbs) CELEUS 200...
Need help?
Do you have a question about the Celeus 200 and is the answer not in the manual?
Questions and answers