1-1. SERVICE NOTE
1.
NOTE FOR REPAIR
Make sure that the flat cable and flexible board are not cracked of
bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
Downloaded from
www.Manualslib.com
Cut and remove the part of gilt
which comes off at the point.
(Take care that there are
some pieces of gilt left inside)
manuals search engine
SECTION 1
SERVICE NOTE
When remove a connector, don't pull at wire of connector.
Be in danger of the snapping of a wire.
When installing a connector, don't press down at wire of connector.
Be in danger of the snapping of a wire.
1-1
DCR-HC14E/HC15/HC15E