Typical Matrox Mxo2 Connections; Analog Component Video Connections - Matrox MXO2 Installation And User Manual

14

Typical Matrox MXO2 connections

In the following typical connection examples, we've connected a monitor to view
the signal that will be recorded, and separate source and record decks. You may,
however, use the same deck as both your source and record device by making the
input and output connections to a single deck. For details on the Matrox MXO2
connectors, see

Analog component video connections

In this illustration, we're using analog component connectors for video, XLR
connectors for audio, and an HDMI connector for video monitoring. The video is
genlocked using MXO2's internal genlock.
HDMI
monitor
Chapter 3, Connecting External Devices to Matrox MXO2
Appendix B, "Matrox MXO2
MXO2 Inputs
MXO2 Outputs
Connectors."
Source
(Deck 1)
Recorder
(Deck 2)