Zte MF180 Quick Manual

Introduction

The ZTE USB modem is a multi-mode USB modem, working in HSDPA/WCDMA/EDGE/GPRS/
GSM networks. With USB interface connecting to a laptop or a desktop PC, it integrates the
functionality of a modem and a mobile phone (SMS), and combines mobile communication with
Internet perfectly. It supports data and SMS services through the mobile phone network, enabling
you to communicate anytime and anywhere.

Specification

USB Modem

The following table shows the specification of your device.
Interface Type
Quick Guide
Systems supported
Operating systems supported
MF180

Functions

Network Standards HSDPA/WCDMA/EDGE/GPRS/GSM
Transmission speed (Max) HSDPA: 3.6Mbps DL
Temperature Storage: -40°C~ +80°C
Dimension 76mm×26mm×11mm(without cap)
Weight About 21g
microSD capability Support up to 32GB microSD card
USB 2.0 HIGH SPEED Notes: microSD Logo is a trademark.
Supports most types of laptop and desktop PC.

Getting to know your device

The following figure shows the appear-
Windows XP, Vista, Windows 7 MAC 10.4, 10.5, 10.6
ance of the MF180. It is only for your
SMS service, Data service, Applications management,
reference. The actual product may be
support microSD card, etc. different.

Hardware Installation

1. Put finger on the bottom finger grip, and then lift the
WCDMA PS: 384 Kbps UL/DL
front cover of the modem to release and remove.
Operation:-10°C ~ +60°C
Notes:
Do not open the front cover rudely so as to avoid the
damage of the front cover.
2. Insert the SIM/USIM card into the SIM/USIM card
1. Indicator
slot.
2. Front Cover
Insert the SIM/USIM card with the metal contact area
3. Modem Cap
4. SIM/USIM card slot facing downwards into the slot, and then push SIM/USIM
5. microSD card slot card as far as possible, shown as the following picture.
6. USB Connector
3. Insert the microSD card into the microSD card slot.
Notes: This modem only supports microSD card.
Insert your microSD card into the microSD card slot, shown as the
following picture.
4. Put the front cover of the modem flatly upon the body of
modem. Direct the front cover towards the locking catches on
the sides of the modem and push the front cover of the modem
to lock the front cover into its place.
5. Connect the Modem to your laptop or desktop PC.
! Plug the USB connector into your computer's USB port
and make sure that it is tightly inserted.
! The OS automatically detects and recognizes new hard-
ware and starts the installation wizard.