Brewing Coffee - Farberware FSCM200BM, FSCM200M, FSCM200RM, FSCM200CBM Use And Care Instructions Manual

BREWING COFFEE

Your Dual Carafe Coffee Maker is a 2-in-1 unit. Each side works inde-
pendently of the other. You can choose to brew 2 pots at once, or
1 at a time.
NOTE: The amount of brewed coffee will always be less than the
amount of water placed into Coffee Maker, since about 10% is
absorbed by coffee grounds and filter.
1. Be sure both Power Switches are in the OFF ("O") position.
2. Plug Coffee Maker into a 120V AC electrical outlet.
3. Fill 1 or both Thermal Carafes with cold water. These Carafes hold
approximately 32 ounces of water each.
NOTE: FILL CARAFES TO 1/2 INCH BELOW THE MOUTH OF THE
CARAFE. DO NOT FILL CARAFES TO THE VERY TOP.
4. Lift the Water Reservoir Covers and carefully pour water into 1 or
both of the Water Reservoirs. Close Covers.
NOTE: DO NOT FILL PAST THE "FILL HOLE" IN THE WATER RESER-
VOIR AS THIS WILL CAUSE WATER TO SPILL FROM UNIT.
5. Place Filter Basket(s) securely onto 1 or both of the Thermal Carafes.
6. Place a paper #2 cone-shaped filter(s) into 1 or both of the
Filter Baskets.
7. Fill 1 or both Filters with desired amount of coffee. Add 1 level
tablespoon of coffee for each cup of coffee desired. If using a
scoop, use 1 scoop (equivalent to 2 tablespoons) for every 2 cups of
coffee. Increase or decrease the amount of coffee used to suit your
individual taste.
8. Place the Filter Basket Cover(s) onto 1 or both of the Filter Baskets.
FIGURE 1
6
Fill Hole
Non-Stick Warming
Plate