How To Use; Getting Started; Setting The Clock; Brewing Coffee - Farberware CM3004SC User Manual

Product may vary slightly from what is illustrated.

1. Cover
† 2. Permanent tea filter (Part # CM3000S-03)
† 3. Removable filter basket (Part # CM3000S-02)
4. Easy-view water window
5. Blue backlit digital display
6. Control panel
7. Sneak-A-Cup interrupt feature (coffee only)
®
† 8. Perfect Pour glass carafe (Part # CM3000S-05)
®
9. Nonstick "keep hot" carafe plate
10. Built-in cord storage (not shown)
Note: † indicates consumer replaceable/removable parts
4








How to Use

This product is for household use only.

GETTING STARTED

• Please go to www.prodprotect.com/applica to register your warranty and for information

about replaceable parts.
• Wash removable parts as instructed in CARE AND CLEANING section.
• Open cover and pour fresh cold water into the water reservoir up to 12-cup (MAX)
mark.
• Place permanent filter or paper 8 – 12 cup basket-style paper filter into filter basket
• Close cover.
• Make sure the carafe lid is in place and place empty carafe on the "Keep Hot"
carafe plate.
• Plug electric cord into an outlet.
• Brew water through appliance following the BREWING COFFEE instructions—without
adding coffee grounds.
• Discard water from the carafe; rinse permanent filter or discard paper filter.
• Turn off the appliance, unplug and allow it to cool down.

SETTING THE CLOCK

1. Plug appliance into standard electrical outlet.
2. The digital clock display flashes 12:00.
Note: You must set the clock in order to use the DELAYED BREWING feature.
3. To change the time: Press HR button until the correct time appears on the display.
When the time passes noon "PM" illuminates to let you know you are in PM time.
If the "PM" is not illuminated it is AM time.
4. Repeat the same procedure with the MIN button to select the minutes.
Note: If the appliance is unplugged or power is interrupted even momentarily, the time
may need to be reset.

BREWING COFFEE

1. open cover.
2. Fill water reservoir using the carafe with desired amount of cold tap water. do not
exceed the 12-cup (MAX) level on the water reservoir.
Important: There are two overflow holes at the back of the coffeemaker. Be careful not
to overfill the water reservoir to avoid leaking onto the counter or work surface.
3. Insert removable filter basket into filter basket holder.
4. Place permanent filter or an 8 –12 cup basket-style paper filter into the removable
filter basket.
5. Add desired amount of ground coffee.
6. Close cover.
7. Make sure carafe lid is properly attached to the empty carafe. Close the lid.
Note: Coffee may overflow if carafe lid is not properly placed.
8. Place empty carafe on the "Keep Hot" carafe plate.
9. Plug power cord into an outlet.
10. If regular brew strength is desired, your coffeemaker is set to brew coffee. (Make sure
the BREW button is in the "Full" position.) .
11. If strong coffee is desired, press the brew strength button to select the strong brew.
(Make sure the BREW button is in the "Full" position.).
12. Press I/o button; its light illuminates and brewing begins.
5