Preparation
Step 1.1 Choosing the installation
location
Overview of installation location requirements
125 mm
or more
(recommended)
Drain hose hole
You can select the direction of
draining (left or right).
Make at least one round to
reduce noise and vibration.
The actual units may look different from
the images depicted here.
Model
Minimum Maximum Maximum
AE022MNADEH
AE028MNADEH
AE036MNADEH
AE056MNADEH
AE071MNADEH
Outdoor
Unit
CAUTION
Outer wall
Indoor
Unit
Cut insulation to have
rainwater drained
100 mm or more
(recommended)
125 mm
or more
(recommended)
(Unit : m)
Pipe length
Pipe height
3
20
15
3
30
20
3
50
30
Make a U-trap (A) on the
pipe (which is connected to
the indoor unit) at outer wall
and cut the bottom part of
the insulation (about 10 mm)
to prevent rainwater from
getting inside through the
insulation.
Step 1.2 Checking and preparing
accessories and tools
Accessories
Accessories in the indoor unit package
Installation plate (1)
022/028
(01 frame)
Installation plate (1)
056/071
(05 frame)
Remote control battery (2)
Installation Manual (1)
Remote Control Holder (1)
Guide Left(1)
Installation plate (1)
036
(03 frame)
Remote control (1)
User Manual (1)
Cap screw (3)
M4 x 16
Tapped Screws (2)
Guide Right(1)
English
5