Center Parameters; Serial Parameters Configure - Caimore CM530-8 1F User Manual

Xiamen Caimore Communication Technology Co.,Ltd

4.6.1 center parameters

Enable DTU: select to enable DTU or not.
The number of centers: Fill in the corresponding value according to the number of user's
central servers.
Center IP address and port: If there is only 1 central server, please configure and fill in the
corresponding column ("main center IP and port") with its IP and port, and leave "1
and port ~ 4 th center IP and port" blank.
If there are multiple central servers, please configure the "1
x center IP address and port" one by one. X is a number of the central server. Please fill the
correct IP address and port in the corresponding column, and leave "the main central IP and
port" blank.

4.6.2 Serial parameters configure

Add:2 F, 37#, Wanghai Road, Xiamen Software Park 2, Xiamen,China (361009)
Tel: 86 592 3799895
Web: http://www.caimore.com
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
Pic. 4-32 Center parameters configuration
Pic. 4-33 Serial parameters configuration
st
43
43
center IP
st
center IP address and port ~
Fax:+86-592-5975885