Ptz Configuration; Alarm Parameter - Caimore CM530-8 1F User Manual

Xiamen Caimore Communication Technology Co.,Ltd

4.3.6 PTZ configuration

Channel：Select which channel the PTZ to control,select one from four,the default channel is
1
Baud rate:set communication rate,value ranges from1200~230400 BPS, the default is
9600BPS。
Data bit： set data bit,value can be set as 5~8，the default is 8。
Stop bit： Set the stop bit,value can be set as 1 and 2，the default is1。
Parity： Set the parity,value can be set as none,odd,even,space,the default is none.
Flow control ： Set flow control,value can be set as none,hardware,software,the default is
none.
Decoder type： Set the decoder type,the default is pelco-d.
Decoder address： Set the decoder address,the default is 1.

4.4 Alarm parameter

Alarm parameter setting module implements the configure of alarm setting,IO alarm defined
time,IO alarm consisted setting,IO alarm status,As picture4-19showed.
Add:2 F, 37#, Wanghai Road, Xiamen Software Park 2, Xiamen,China (361009)
Tel: 86 592 3799895
Web: http://www.caimore.com
2 F, 37#, Wanghai Road, Software Park 2, Xiamen,China (361009)
Pic. 4-18 PTZ configure
35
35
Fax:+86-592-5975885