OPERATING PROCEDURE
4. Removing the thermistor <Suction pipe> (TH6)
Note: When replacing thermistor <Suction pipe> (TH6),
replace it together with thermistor <Ambient> (TH7)
since they are combined together.
Refer to procedure No.5 below to remove thermis-
tor <Ambient> (TH7).
5. Removing the thermistor <Ambient> (TH7)
Note: When replacing thermistor <Ambient> (TH7),
replace it together with thermistor <Suction pipe>
(TH6), since they are combined together.
Refer to procedure No.4 above to remove thermis-
tor <Suction pipe> (TH6).
OCH573E
PHOTOS/FIGURES
Photo 5
Photo 6
Photo 7
Photo 8