Toshiba RAV-SM2246AT8J-E Service Manual page 110

No. Part name
Side 1) Following to work of item 1of
cabinet
2) Remove the side cabinet (left) and base plate screws.
(left)
(2 pcs, Ø4 ×10 hexagon screws)
3) Slide the side cabinet (left) downwards and remove.
Air-outlet 1) Following to work of item 1
cabinet
2) Remove the screws from the Air-outlet cabinet and
separate plate. (4 pcs, Ø4 × 8)
3) Remove the screws from the Air-outlet cabinet and
base plate. (2 pcs, Ø4 × 10 hexagon screws)
4) Remove the screws from the Air-outlet cabinet and
motor base. (2 pcs, Ø4 × 8)
5) Remove the screws form the Air-outlet cabinet and
heat exchanger. (4 pcs, Ø4 × 8)
Side 1) Following to work of item 1 of
cabinet
2) Remove the screws securing the inverter assembly
(right)
and side cabinet (right). (3 pcs, Ø4 × 8)
3) Remove the screws form the side cabinet (right) and
valve fixing plate. (2 pcs, Ø4 × 8)
4) Remove the screws form the side cabinet (right) and
piping panel (rear). (2 pcs, Ø4 ×10 hexagon screws)
5) Remove the screws form the side cabinet (right) and
base plate. (1pcs, Ø4 ×10 hexagon screw)
6) Remove the screws from the side cabinet (right) and
heat exchanger. (5pcs, Ø4 × 10 hexagon screws)
Procedure
.
of .
.
– 110 –
Remarks
Side cabinet
(left)
Base plate
Separate plate Separate plate Separate plate
Base plate Base plate Base plate
Motor base Motor base Motor base
Air-outlet Air-outlet Air-outlet
cabinet cabinet cabinet
Side
cabinet
(right)
Inverter
assembly