Required Equipment; Hardware Setup - Active-semi ACT88325EVK1-101 User Manual

EVK Contents
The ACT88325EVK1-101 evaluation kit comes with the following items?
1. EVK Assembly
2. USB-TO-I2C dongle
a. Dongle
b. Custom 4-pin connector that connects the USB-TO-I2C dongle to the EVK assembly.

Required Equipment

ACT88325EVK1-101
USB-TO-I2C Dongle
Power supply – 3.5V @ 4A for full power operation
Oscilloscope – >100MHz, >2 channels
Loads – Electronic or resistive. 3A minimum current capability.
Digital Multi-meters (DMM)
Windows compatible computer with spare USB port.

Hardware Setup

Innovative Power TM
TM
ActiveSwitcher is a trademark of Active-Semi.
Figure 2 – EVK Setup
2
UG125
Rev 1.0, 20-Jun-2018