Connecting To Ac Power - Bose SoundLink Color Owner's Manual

Operation

Connecting to AC power

Before using your speaker, connect it to power and charge the battery. Allow
3 hours for a full charge. You can use the speaker while it is charging.
1. Plug the small end of the power supply cord into the POWER connector on
the back of the speaker.
2.
Plug the large end of the power supply cord into the connector on the AC
power supply.
3. Extend the power supply prongs. If needed, snap on the adapter for your
region. To remove an adapter, press back on the release tab (A) and lift the
adapter up and off (B).
4. Plug the power supply into an AC (mains) power outlet.
The battery indicator glows amber.
Note: You can also charge the speaker by connecting the power supply cord to a
powered USB port on your computer. For fastest charging time, use the USB
power supply cord provided by Bose.
8 - English