Experiment 3 - Drive Buzzer On And Off - ablelogic AVR-DK20A User Manual

6.3 Experiment 3 – Drive Buzzer ON and OFF
Jumper Setting: LK1 (A0-BZ)
Port Setting : Set Port A bit 0 as output
Objective:
Create a project, set the buzzer on and off with delay.
Flow Chart:
Expected Result
You will hear the buzzer On and Off.
AVR Development Board – AVR-DK20A User Manual
Start
Initialize I/O
Infinity Loop
Set all buzzer ON
Delay
Set all buzzer
OFF
Delay
27