Table of Contents
Advertisement
4.3 Installation of AVR8 Burn-O-Mat v2 software:
A free AVR8 Burn-O-Mat v2 installer can be downloaded from
1.
http://www.brischalle.de/avr8_burn-o-mat_avrdude_gui/avr8_burn_o_mat_avrdude_gui_en.html
or from the CD provided.
2. After downloading, installation can be started by double click the setup.exe file.
3. After installed. Run the AVR8 Burn-O-Mat software.
4. Then click the setting tab and choose AVRDUDE.
5. Choose the setting as below.
6. Then click ok.
7. The software is ready to be use.
AVR Development Board – AVR-DK20A User Manual
17
Advertisement
Table of Contents
