Selecting Programmes - Silvercrest SLE 265 B3 Operating Instructions Manual

Selecting programmes

The appliance has 4 distinct programmes.
♦ Press the MODE BUTTON
The programme LED
TARGET HUMIDITY
This programme offers you the option of setting the desired air humidity level.
♦ Press the arrow button
steps between 30% and 80%. The set value flashes for approx. 5 seconds
on the display
Additionally, you also have the option to select the setting
make a setting below 30% relative humidity. This setting allows you to achieve
a very low humidity as the dehumidification runs permanently.
NOTE
► The minimum humidity that can be achieved in the
on many factors, such as the room size or the ambient temperature, etc.
Therefore it is not possible to define a generally applicable minimum value.
AUTOMATIC
The relative humidity that should be achieved is set permanently to 55%. The
appliance dehumidifies until this value is achieved and then switches off. If rela-
tive humidity increases again, the appliance switches on again. Changes in the
desired humidity are not possible in this programme.
Select this programme for sustained dehumidification at a comfortable relative
humidity of 55%.
SLE 265 B3
24
repeatedly to set the desired programme.
14
of the set programme lights up.
22 23
or
15
and then the current relative humidity is shown again.
to set the desired humidity in 5%
if you want to
mode is dependent
GB│IE│NI
13 ■
│