Advertisement
ACM5504-5-LA-I, ACM5504-5-LR-I
Thank you for purchasing the ACM5504-5-LA/LR/LV-I management gateway (referred to
ACM5504-5-L
herein as
configuration. For more details refer to the
Step1 Check kit contents
Step 2 Connect the hardware pieces
Attach rubber feet to base. Also attach the desired mounting tab and screw the
4G LTE antenna on to the main
Note: If you have purchased a diversity antenna, screw it on to the
If you have purchased a GPS antenna, screw it on to
Your carrier will provide a SIM card for activating you data plan. Unscrew the
SIM card access panel and insert the SIM card in the bottom SIM slot
with contacts facing downward and the notch to RHS. Then replace the SIM
card access panel. Refer User manual for multiple SIM installation
ACM5504-5-L
Note: The
LA-I works with AT&T's 4G LTE 700 / HSPA service (USA). The ACM5504-5-LV-I
works with Verizon's 4G LTE 700 / 3G EVDO service (USA). The ACM5504-5-LR-I
works with 4G LTE 800-2600 / HSPA+ carrier services globally
Connect the Ethernet
devices to the
Plug your serial console devices into
Connect your USB devices to the two
terminal block and attach external sensors and DIO
Note: Refer ACM5500-I Addendum for RS422/485 and DIO details
Apply power. The
connecting the provided external power pack to the
connecting an external 9 to 24 VAC source to the
connecting +9V to 30 VDC to
ACM5504-5-LA/LV/LR-I Quick Start (520059 -Rev 1.0)
). This Quick Start walks you through both installation and
User Manual
ACM5504-5-L
External
green connector block and 7-band
UTP cables & straight (319014) & crossover (319015) DB9F-
RJ45S. Quick Start and CDROM. 12V DC power pack.
Cell (M)
family works with 4G LTE carriers globally. The ACM5504-5-
LAN
port to your network. Connect your management LAN
ETHERNET 1-4
ports
ACM5504-5-L
can now be powered externally by either:
DC PWR
ACM5504-5-LV-I
Quick Start Guide
on the CDROM.
device.
External rack and DIN rail
connector
GPS
SERIAL 1-4
(all Cisco RJ45 pin-out).
USB
ports.
Plug in the green screw
12VDC
12VDC
barrel socket or
GND
and
on the green terminal block
mount tabs.
4G LTE antenna.
Cell (A)
connector.
barrel socket or
Page 1
Advertisement
Table of Contents
Related Manuals for Opengear ACM5504-5-LA-I
Summary of Contents for Opengear ACM5504-5-LA-I
-
Page 1: Quick Start Guide
ACM5504-5-LA-I, ACM5504-5-LR-I ACM5504-5-LV-I Quick Start Guide Thank you for purchasing the ACM5504-5-LA/LR/LV-I management gateway (referred to ACM5504-5-L herein as ). This Quick Start walks you through both installation and User Manual configuration. For more details refer to the on the CDROM. - Page 2 Note: If you ordered the -SDC option you’ll have an external DC-DC power converter (input voltage +/- 36V DC to 72V DC. The 12VDC converter power cable/ connector plugs into the socket ACM5504-5-L is ready for activation when the PWR status LED on the front panel of the unit is lit steady, and the H/B (heartbeat) LED is flashing.
- Page 3 Enable Override DNS. Then check the Override returned DNS Servers box and enter the IP of the DNS servers into the spaces provided. Your 4G LTE carrier may have provided you with connection details. However, you Note: generally will only need to enter your provider’s APN and leave the other fields blank.
- Page 4 Monitoring Custom Scripting Command Line User Manual and a interface. Refer to the Please register your product to activate the warranty and to automatically receive advice of future firmware updates. Go http://opengear.com/product-registration.html ACM5504-5-LA/LV/LR-I Quick Start (520059 -Rev 1.0) Page 4...
Need help?
Do you have a question about the ACM5504-5-LA-I and is the answer not in the manual?
Questions and answers