Quick Start Guide - Philips CED230/98 Installation Manual

Quick start guide /

Caution /
• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteriesin fire.
• Risk of decreased battery life! Never mix different brands or types of batteries.
• Risk of product damage! When the remote control is not used for long periods, remove the batteries.
• Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/percholorate.
•
•
•
• www.dtsc.ca.gov/hazardouswaste/percholorate
1
Turn on: Press OK/MUTE to turn on.
Turn off: Press and hold the same button for 3 seconds to turn off.
OK/MUTE
3
2
Adjust volume: Turn the control knob of the unit or press + or - of the remote control.
+
Quick start guide /
CR2025
3V
CR2025
-
CED230/98
3
Mute volume: Press OK/MUTE on the unit or
OK/MUTE
4
Insert USB device:
1. Slide down the USB socket cover.
2. Then, insert the USB device into the USB socket.
USB
1. USB
2. USB USB
5
Insert SD/SDHC card or CD:
1. Press to open the front panel.
2. Insert the SD/SDHC card into the card slot, or CD into the disc slot.
3. Flip and close the front panel.
SD/SDHC CD
1.
2. SD/SDHC
3.
All rights reserved.
www.philips.com
Specification are subject to change without notice.
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
2013 Koniniklijke Philips Electronics N.V.
©
of the remote control to mute the sound.
CD