If in doubt do not use the air circulator and consult a qualified electrician or a Meaco approved engineer. The operator must make the operating instruction available for the user and make sure that the user does understand the manual.
2. The BROWN wire is the LIVE and must be connected to the terminal which is marked with the letter L or coloured RED. 3. Always ensure that the cord grip is positioned and fastened correctly. Only ever use the same fuse as fitted in the original product, if in doubt please contact Meaco first or a qualified electrician. 1.GENERAL ADVICE Before putting your air circulator into operation for the first time, the instruction manual should be studied carefully.
3. CONTROL PANEL AND OPERATION ON/OFF Button Press to turn the fan on or off, the appliance makes a ‘beep’ sound when turned on and enters the standby state. Speed Button Press the speed button on the control panel/ remote controller to adjust the air flow fan speed. There are 12 fan speeds available.
Fan not turned on Press the On button. On button does not work Check instructions above If it still does not work then contact Meaco. If the oscillation button does not work then Oscillation does not work Press oscillation button contact Meaco.
There is a two year warranty on your air circulator from the date of purchase. Please register your warranty at www.meaco.com, as a thank you we will enter you into our monthly free prize draw. All material or manufacturing defects will be repaired free of charge.
Need help?
Do you have a question about the MeacoFan 1056AC and is the answer not in the manual?
Questions and answers
what number fuse do use for Meaco1056 fan is it 3A?