1. Manuals
  2. Brands
  3. SANUPS Manuals
  4. UPS
  5. A11J
  6. Operating manual

SANUPS A11J Operating Manual

Lcd panel
Hide thumbs
Table of Contents

Advertisement

Quick Links

M0009235E
LCD Panel
Operating Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A11J and is the answer not in the manual?

Questions and answers

Related Manuals for SANUPS A11J

Summary of Contents for SANUPS A11J

  • Page 1 M0009235E LCD Panel Operating Manual...

  • Page 2: Table Of Contents

    Introduction Thank you for choosing the SANUPS A11J. SAVE THESE INSTRUCTIONS This manual describes the functions and setting operations of the LCD panel menus. To operate correctly, read this manual when setting or changing the LCD panel menus of the UPS. Please be sure to also read A11J Instruction Manual for details about UPS installation and operation.

  • Page 3: Identifying Lcd Panel

    §1. Identifying LCD Panel § ② UNINTERRUPTIBLE POWER SUPPLY ① ③ ⑤ ⑥ ⑩ ⑧ ⑦ ⑨ ④ Name Label Color Function Lights When input power is normal ① Input LED Green INPUT Blinks When input power is abnormal ② Backup LED Green Lights When the battery is operating...

  • Page 4: Functions Of Home Menus

    § The LCD panel provides five home menus. Each home menu has its own setting groups and settings. For details on each of the home menus and how to change settings, read the respective pages of the home menus. §6. “Menu List” summaries all menus and settings. Home menu Function Description...
  • Page 5 § Note Slide down the cover, and then press ① If you press while the UPS's buzzer is beeping, the buzzer stops. to display the LCD screen. If a single press fails to stop the buzzer, keep pressing repeatedly until the buzzer stops. The menu will not appear on the LCD screen if you press while the buzzer is beeping.
  • Page 6 § § You can view the current operation status of the UPS system. ① Press to display the LCD screen. ② Make sure “STATUS” appears on the screen. STATUS ③ Press to display the UPS status. Status Home menu １ ３...

  • Page 7: Viewing Ups Measurements

    § 2 Viewing UPS Measurements You can view various UPS measurements. The displayed measurements refer to numbers about the UPS system. ① Press to display the LCD screen. ② Press to change the home menu to the one shown below. STATUS ③...
  • Page 8 § The SETTING menu contains 7 settings groups. The “＊” in the “Default setting” column indicates factory defaults. Change the settings to suit your operating environment or usage. For details on how to change the settings, read sections §3.1 to §3.22. Once you change the value of a setting, we recommend that you place a check mark in the “Current setting”...
  • Page 9 For settings marked with “★”, after you change their values, the values will not take effect until you restart the UPS. Therefore, after changing the values, read §3.23 “Restarting UPS” and then start the UPS again. A11J Instruction Manual For details on UPS operation, refer to the .
  • Page 10 § This section describes how to set the UPS voltage. ① Press to display the LCD screen. STATUS ② Press to change the home menu to the one shown below. ③ Press to accept it. ④ In the same way, follow the figure below to make selection at each level, as follows: “Home menu”...
  • Page 11 § This section describes how to specify a tracking range to synchronize the output frequency with the input frequency. ① Press to display the LCD screen. STATUS ② Press to change the home menu to the one shown below. ③ Press to accept it.

  • Page 12: Setting Synchronous Frequency Tracking Range

    § The frequency has been set to “Auto” when the UPS is shipped from the factory. Do not change the value, except when using UPS in a special power supply environment. If you changed the value accidentally, use the procedure below to change it to “Auto”. ①...
  • Page 13 100V For details on terminal block settings and values, refer to the If rated input voltage and output A11J Instruction Manual 200V/200V voltage are both 200V These are the values of voltage and current that appear on the LCD screen when UPS measurements are displayed.
  • Page 14 § This section describes how to specify an interface method when a PC interface connector is used. For details on A11J Instruction Manual PC interface connector, refer to §5.4 “External Interface” in the ① Press to display the LCD screen.
  • Page 15 § This section describes how to specify a baud rate for connection to a workstation, PC, or LAN interface card. ① Press to display the LCD screen. STATUS ② Press to change the home menu to the one shown below. ③...
  • Page 16 § This section describes how to specify an operation to use in utility power recovery after the UPS is stopped by end of battery discharge during power outage. ① Press to display the LCD screen. STATUS ② Press to change the home menu to the one shown below. ③...
  • Page 17 § This section describes how to specify a condition to sound the buzzer. ① Press to display the LCD screen. STATUS ② Press to change the home menu to the one shown below. ③ Press to accept it. ④ In the same way, follow the figure below to make selection at each level, as follows: “Home menu”...
  • Page 18 § This section describes how to shut down the UPS using on its control panel. This setting prevents unintended contact or accidental operation of the button to cause the UPS to stop. On the control panel, only the “OFF operation” of is enabled, but the “ON operation”...

  • Page 19: Setting Frequency

    § This section describes how to specify a condition for returning to UPS power supply after switching to bypass power because of overload. ① Press to display the LCD screen. STATUS ② Press to change the home menu to the one shown below. ③...
  • Page 20 § This section describes how to specify UPS power supply when the button's OFF operation performed in A11J Instruction Manual “UPS Shutdown” of the causes the UPS to stop ( MAIN MCCB is ON). ① Press to display the LCD screen.
  • Page 21 § This section describes how to set the time to issue low battery voltage warning. ① Press to display the LCD screen. ② Press to change the home menu to the one shown below. STATUS ③ Press to accept it. ④...
  • Page 22 § This section describes how to set a duration to run a battery test either regularly or manually. ① Press to display the LCD screen. STATUS ② Press to change the home menu to the one shown below. ③ Press to accept it.
  • Page 23 § This section describes how to set a schedule (number of days) to run an automatic battery test. The test is carried out automatically when the specified number of days has elapsed. ① Press to display the LCD screen. STATUS ②...

  • Page 24: Setting Pc Interface

    § This section describes how to specify the time from when the UPS starts backup to when output supply stops. Note This function is enabled only when “Standalone” is set in §3.5 “Setting PC Interface”. See page 12 to check the interface setting.
  • Page 25 § This section describes specifying whether to output the RING signal when the UPS starts. * What is a RING signal? This is a signal which starts a connected computer automatically when the UPS starts. This function is enabled if a computer supporting the “Wake Up on Ring” function is connected to the UPS with the communication cable (optional).
  • Page 26 § This section describes how to set adjustment for the output voltage set up in §3.1 “Setting Voltage”. Three levels on the plus side and three levels on the minus side (about -3V to +3V) can be selected. ① Press to display the LCD screen.
  • Page 27 § This section describes how to set the UPS clock. Because the clock has been set when the UPS is shipped from the factory, normally do not change the clock. ① Press to display the LCD screen. STATUS ② Press to change the home menu to the one shown below.
  • Page 28 § This section describes how to specify the number of UPS units in parallel connection to form a UPS system. Because this value has been set at the factory, normally do not change it. ① Press to display the LCD screen. STATUS ②...
  • Page 29 § This section describes how to specify the UPS operation system. You can choose between parallel redundant operation or single machine/parallel operation. ① Press to display the LCD screen. STATUS ② Press to change the home menu to the one shown below. ③...
  • Page 30 § This section describes how to specify the UPS input phase. ① Press to display the LCD screen. STATUS ② Press to change the home menu to the one shown below. ③ Press to accept it. ④ In the same way, follow the figure below to make selection at each level, as follows: “Home menu”...

  • Page 31: Setting Voltage For Measurement Display

    § This section describes how to restore settings mentioned in sections §3.1 to §3.21 back to their factory defaults. Use the list in §3. “Setting UPS” to check the factory defaults. Once you restore the settings back to their factory defaults, you cannot return to their previous values. ①...
  • Page 32 It means stopping the operating UPS and then starting it again. If “Please restart the UPS” is mentioned in the LCD Panel Operating Manual (this manual) or A11J Instruction Manual with reference to enabling changes in settings to take effect, stop the operating UPS, wait for the specified time to elapse, and then restart the UPS.

  • Page 33: Operating Ups

    §4. Operating UPS You can perform three operations from the CONTROL menu: running battery test, starting/stopping UPS, and switching to bypass operation. For details on the operations, see the sections from §4.1 to §4.4. List of operations Home menu: CONTROL Operation Displayed item Displayed content...

  • Page 34: Running Battery Test

    § T i p This section describes how to run a battery test. By default, a battery You can change the battery test time (min.). test is carried out automatically once every 180 days. If you want to run See §3.13 “Setting Battery Test Time”. a battery test manually, use the following procedure.
  • Page 35 UPS state, and then try again. Note on battery test The result serves as a general guide only. Even if the result is normal, refer to “General Guide on Battery the A11J Instruction Manual Replacement” in and, if the replacement time has come, contact your supplier or SANYO DENKI as soon as possible.

  • Page 36: Reading Battery Test Result

    § This section describes how to read the battery test result generated during a battery test performed either automatically or manually. ① Press to display the LCD screen. STATUS ② Press to change the home menu to the one shown below. ③...

  • Page 37: Starting Or Stopping Ups

    You can also use the button on the LCD panel or the button on the main unit's control panel A11J Instruction Manual to start or stop the UPS. For details, refer to “Performing Operation” in the ⑥ Press to return to the home menu.

  • Page 38: Switching To Bypass Operation

    § You can switch the UPS operation to the bypass operation using following procedures if a UPS malfunction occurs or when maintaining the UPS. ① Press to display the LCD screen. STATUS ② Press to change the home menu to the one shown below. ③...

  • Page 39: Maintenance Menu (For Service Technician)

    §5. Maintenance Menu (For Service Technician The maintenance menu is intended for use by a service technician to perform maintenance of the UPS. Even though details are described in §6. “Menu List”, do not use the menu to perform any operation. The operation is described in the maintenance manual for service technician.

  • Page 40: Menu List

    § 1. STATUS UPS mode Status display Home menu Display Description Display Description Display Description Asynchronous operation End of battery life Standby S T A T U S STANDBY Output Not Sync Batt Life End (UPS status Input frequency error Battery life end warning Online Input Freq Err...
  • Page 41 3. SETTING Settings Values Home Default Settings group menu Display Content Description Display Description setting Output voltage 200V 200V ＊ S E T T I N G Output voltage 220V 220V Output voltage Set UPS output voltage. Output voltage 230V (various Voltage 230V...
  • Page 42 4. CONTROL Operation Displayed item Displayed content Home menu Display Description Display Description Display Description Result Description OK to start Operation canceled [SELECT] = OK Control NG C O N T R O L Start Start [BACK] = Cancel Cancel Normal termination Control OK (UPS operation)

  • Page 43: Status Description

    § The following table lists details about UPS states that appear on the LCD screen in the “STATUS” home menu. If you cannot resolve the problem when the UPS malfunctions, contact your supplier or SANYO DENKI. UPS mode State display Display Description Display...

  • Page 44: Notes On Ups Measurements Information

    %” is indicated as “0%” if you operate the LCD panel to display it at initial startup of the UPS. Since the battery charging rate will increase according to operating time of the UPS, A11J Instruction Manual see the item “Charging UPS” in the to operate the UPS.

Table of Contents