Cleaning The Chipper/Shredder; Storing The Chipper/Shredder; Specifications; Maintenance & Storage - BBT -MUL-7HPES Owner's Manual

Cleaning the Chipper/Shredder

• Make sure engine is off.
• Wipe off machine with an oiled rag to prevent rust.
• If the fuel tank has to be drained, do so outdoors.
• Observe proper disposal laws and regulations for petrol, oil, etc., to protect the environment.

Storing the Chipper/Shredder

• Clean the equipment thoroughly.
• Wipe equipment with an oiled rag to prevent rust.
• Refer to engine manual for correct engine storage instructions.
• Store unit in a clean, dry area. Do not store next to corrosive materials such as fertilizer.
• NEVER store the machine or fuel container inside where there is an open flame, spark or pilot light such as a
water heater, furnace, clothes dryer, etc.
MODEL
Maximum RPM
Horsepower
Fuel Type
Fuel Capacity
Oil Type
Oil Capacity
Engine Type
Displacement
Start Type
Chipper
Mulcher
Maximum Cutting Thickness
Diameter
Technical Data subject to change without notice.
12 WWW.BBTA.COM.AU
MAINTENANCE & STORAGE

SPECIFICATIONS

BBT-MUL-6.5HPBS
3600 RPM
6.5 HP
Unleaded 95 Octane
or higher
3.5L
SAE30
600ml
Briggs & Stratton
Vanguard
196cc
Pull Start
YES
YES
76mm
BBT-MUL-7HPES
3600 RPM
7 HP
Unleaded 95 Octane
or higher
3.5L
SAE30
600ml
JD
208cc
Electric Start & Pull
Start
YES
YES
76mm
BBT-MUL-15HPES
3600 RPM
15 HP
Unleaded 95 Octane
or higher
7L
SAE30
1100ml
JD
420cc
Electric Start & Pull
Start
YES
YES
128mm x 80mm
BBT-MUL-7HPES