Advertisement
Step 1 – Installation of Control Software
It is necessary to install to the PC the software supplied in the installation CD. Insert the CD into the
CD drive and start the program "install.exe" from the installation CD in case when the installer is not
started automatically.
Follow the all installation steps:
1 – Installation of InterBase database
2 – Installation of WS Control Software
3 – Database creation
Step 2 – Interconnection of the Device with PC
Connect the PC to the device through the USB or RS-232 cable.
Step 3 – Communication Parameters Setting
-
Start the program ws.exe
-
Select menu item Configuration / Parameters from the main program window (Fig. 1) for
displaying communication parameters settings window (Fig. 2)
-
Select correct port to which the device is connected and communication speed same as is set
in device
Fig. 1 - Main program window
Step 4 – Measured Data Reading
Connect the device to the PC and select menu item System->WS readout from the main program
window (or use WS Readout button located under the main menu).
Measured data will be transferred into the database of the PC.
www.appliedp.com
6. Measured Data Reading
Fig 2 – Communication parameters
WS2120-QG23c-EN
Working Standard WS 2120
settings window
Quick Guide
7
Advertisement
