Electrolux MFF3025 Use & Care Manual page 28

CARE & CLEANING
Ceramic glass cooktop maintenance
(some models)
IMPORTANT
Consistent and proper cleaning is essential to
maintaining your ceramic glass cooktop.
Prior to using your cooktop for the first time, apply some
of the glass-ceramic cooktop cleaner supplied with your
new appliance. Buff with a non-abrasive cloth or no-
scratch cleaning pad. This will make cleaning easier when
soiled from cooking. The special cooktop cleaning cream
leaves a protective finish on the glass to help prevent
scratches and abrasions.
Sliding aluminum or copper clad bottom pans on the
cooktop can cause metal markings on the cooktop surface.
These marks should be removed immediately after the
cooktop has cooled using the cooktop cleaning cream.
Metal marks can become permanent if not removed prior
to future use.
Cookware (cast iron, metal, ceramic or glass) with rough or
dirty bottoms can mark or scratch the cooktop surface.
Do not:
• Slide anything metal or glass across the cooktop.
• Use cookware with dirt or dirt build up on bottom;
replace with clean cookware before using.
• Use your cooktop as a cutting board or work surface in
the kitchen.
• Cook foods directly on the cooktop surface without a pan.
• Drop heavy or hard objects on the ceramic glass
cooktop, they may cause it to crack.
28
Ceramic glass cooktop cleaning
(some models)
CAUTION
Before cleaning the cooktop, be sure the controls are
turned to OFF and the cooktop is COOL.
For light to moderate soil:
Apply a few drops of glass-ceramic cooktop cleaner
directly to the cooktop. Use a paper towel or use a non-
abrasive plastic type no-scratch cleaning pad to clean the
entire cooktop surface. Make sure the cooktop is cleaned
thoroughly, leaving no residue.
For heavy, burned on soil:
Apply a few drops of glass-ceramic cooktop cleaner
directly to the soiled area. Rub the soiled area using a
non-abrasive plastic type no-scratch cleaning pad, applying
pressure as needed. Do not re-use the pad used to clean
the cooktop for any other purpose.
If soils remain, carefully scrape soils with a metal razor
blade scraper, holding scraper at a 30 degree angle to
the surface. Remove loosened soils with cooktop cleaning
cream and buff surface clean.