Advertisement
CAUTION:
To reduce the risk of fire and electric shock:
1. Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal.
2. Do not mount or support wires in a manner that can cut or damage wire insulation.
SAVE THESE INSTRUCTIONS.
TECHNICAL SPECIFICATIONS
Projection
TM
Fuse
Stake
ASSEMBLY INSTRUCTIONS
1. Assemble the light stake parts A & B as shown in illustration 1. Push the A and B parts together
until tighten the screws.
2. Push A through the circle,insert the grooves of projection ,and tighten the circle,then adjust the
angle of projection . (See illustration 1)
TM
3.
Plug power cord into standard wall socket. (See illustration 2)
4. Unplug when not in use.
USER SERVICING INSTRUCTIONS
Fuse Replacement
WARNING:
Risk of Fire: Replace only with same size and type of fuse.
WARNING:
Risk of Fire: Do not replace the attachment plug. Contains a safety
device (fuse) that should not be removed. Discard product if
attachment plug is damaged.
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.
1pc
2pcs
1pc
TM
E-2
A
B
illustration 1
illustration 2
Working
Fuse
Replace
Fuse
Advertisement
