User Servicing Instructions - Gemmy 12170 Instructions Manual

SAVE THESE INSTRUCTIONS USE AND CARE INSTRUCTIONS

USER SERVICING INSTRUCTIONS

1. Before using and reusing, inspect the product carefully. Discard any products that have cut, damaged or frayed wire
insulation cords, cracks, lamp holders or enclosures, loose connection, or exposed copper wire.
2. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes,
to avoid any undue strain or stress on the product conductors, connections and wires.
3. When not in use, store neatly in a cool, dry location protected from sunlight.
USER SERVICING INSTRUCTIONS
WARNING:
ASSEMBLY INSTRUCTIONS
1. Gently remove contents from packaging and lay out in a clear
area.
2. Connect the stake to the projector by pushing the swivel ball
through the ring, then screw it onto the projector. Swivel to
reach the angle desired. (Illustration 1)
3. Grasp the handle of the stake and insert into the ground.
(Illustration 2)
4. Plug power cord into standard wall socket. ( illustration 3)
5. Unplug when not in use.
USER SERVICING INSTRUCTIONS
Fuse Replacement
WARNING:
WARNING:
device (fuse) that should not be removed. Discard product if attachment plug is damaged.
1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord.
2. Open fuse cover. Slide open the fuse access cover on top of the attachment plug towards
blades. (See illustration)
3. Remove fuses carefully.
4. Replace fuse only with 5 Amp Max, 125 Volt fuse (provided with product).
5. Close the fuse cover. Slide closed the fuse access cover on top of the attachment plug.
Remove all plastic fasteners and tags. These are part of the packaging and should be discarded.
Replace only with same size and type of fuse.
Risk of Fire:
Do not replace the attachment plug. Contains a safety
Risk of Fire:
A
Illustration 1
E-2
Illustration 2
Illustration 3