Download Print this page

Gemmy Projection Instructions

Advertisement

Quick Links

INSTRUCTIONS
SAFETY WARNING:
the packaging and should be discarded.
SAVE THESE INSTRUCTIONS –
and operating instructions for power units.
WARNING
ELECTRIC PRODUCT. Keep away from children. As with all electrical products, precautions should
be observed during handling and use to reduce the risk of electric shock. If the supply cord is
damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
WARNING
Strobe lights have been known to trigger seizures in people with photosensitive epilepsy.
WARNING
The light is very bright. Do not shine directly into eyes.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING(THIS FURNISHING)
WARNING: TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK
OR INJURY TO PERSONS :
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
1.
Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
2.
Do not let lamps rest on the supply cord or on any wire.
3.
Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
4.
Do not cover the product with cloth, paper or any material not part of the product when in use.
5.
Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor
applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified
electrician for proper installation.
6.
This seasonal use product is not intended for permanent installation or use.
7 .
Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
8.
Unplug the product when leaving the house, when retiring for the night, or if left unattended.
9.
This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with
or placed where small children can reach it.
10.
Do not use this product for other than its intended use.
11.
Do not hang ornaments or other objects from cord, wire, or light string.
12.
This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace
the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the
replacement fuse blows, a short-circuit may be present and the product should be discarded.
13.
This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug
will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace.
14.
Read and follow all instructions that are on the product or provided with the product.
Remove all plastic fasteners and tags. These are part of
This manual contains important safety
E-1
E

Advertisement

loading

Summary of Contents for Gemmy Projection

  • Page 1: Important Safety Instructions

    INSTRUCTIONS SAFETY WARNING: Remove all plastic fasteners and tags. These are part of the packaging and should be discarded. SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for power units. WARNING ELECTRIC PRODUCT. Keep away from children. As with all electrical products, precautions should be observed during handling and use to reduce the risk of electric shock.
  • Page 2: Save These Instructions

    1. Assemble the light stake parts A & B as shown in illustration 1. Push the A and B parts together until tighten the screws. 2. Push A through the circle,insert the grooves of projection ,and tighten the circle,then adjust the angle of projection . (See illustration 1) illustration 1 Plug power cord into standard wall socket.
  • Page 3: Operating Determinations

    OPERATION - Insert the plug into socket. - Set this device as a projection . - Extrt the plug if not in use. Be careful with the power cord! WARNING • The device is for indoor and outdoor use! •...
  • Page 4 330055 330058 440044 440138 440171 445042 445043 445050 445064 445065 445112 445131 445132 Visit for more information. WWW.GEMMY.COM ©2018 GEMMY INDUSTRIES CORP. 117 WRANGLER DRIVE. SUITE 100 COPPELL, TX 75019 U.S.A. 1 (877) 250-9032 MADE IN CHINA PRINTED IN CHINA...