Contacta IL-K200 Installation & User Manual

"under the counter" loop kit

Advertisement

Quick Links

"Under the Counter" Loop Kit
IL-K200
Installation &
User Guide
December 2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IL-K200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Contacta IL-K200

  • Page 1 “Under the Counter” Loop Kit IL-K200 Installation & User Guide December 2016...
  • Page 3: Table Of Contents

    The Loop Driver Handy Tips Using the System Maintenance Troubleshooting Contacta has a policy of continuous product development, therefore small specification changes may not be reflected in this manual. Images, labels, packaging, accessories and product colours are subject to change without notice.
  • Page 4: Product Overview

    Product Overview Our “Under the Counter” loop kit provides clear communication with hearing device wearers, especially where background noise is a problem or clear speech is restricted. It has a flexible aerial that can be bent to shape, allowing it to be installed into many different positions under a desk or counter unit.
  • Page 5: Installation Instructions

    Installation Instructions We recommend that installation is carried out by a qualified engineer, adhering to the relevant standards. Check the contents of the box to familiarise yourself with the components. 2. Ascertain the best locations for the various components, such as where the driver will be attached.
  • Page 6 5. Check the cable route to the driver location, especially cable length to other components and access through the counter top. 6. Place the driver in the correct location under the staff counter. Fixing points 5. Mark the 4 fixing points for drilling. 6.
  • Page 7: Initial Set-Up

    Initial Set-Up Once installed, volume adjustments are not needed as the driver self-adjusts; the system is ready to operate. Please ensure you test the loop using one of our loop listeners. The Loop Driver The driver has no buttons on the front panel. Please see below an overview of the indicators on the front panel of the HLD2 driver.
  • Page 8: Handy Tips

    Handy Tips Removing Green Connectors Each component comes fitted with two-way and three-way connection plugs located in the appropriate sockets at the rear of the driver. If wires require to pass through small apertures, the connection plugs may be removed temporarily. The plugs connect to the cables by screw terminal connections so cables can...
  • Page 9: Using The System

    Using the System • Face the microphone and speak normally from your seated/ standing position • The speech is converted to an alternating magnetic field and transmitted via the loop aerial • This is picked up by the telecoil in the customer’s hearing device and converted back to speech There’s nothing more you need to do! If the hearing device wearer doesn’t pick up the signal:...
  • Page 10: Maintenance

    Maintenance To prolong the life of the product, the following procedures should be carried out on a regular basis, keeping the system at its optimal performance: • Ensure all connectors are firmly inserted into their sockets on a regular basis •...
  • Page 11: Troubleshooting

    Troubleshooting Symptom Possible Fault Action No power detected 1) Power jack not plugged in or 1) Check power jack is firmly through amplifier faulty plugged in 2) Plug fuse has blown 2) Put the unit to one side and seek further advice 3) Faulty power supply unit 3) Change the power supply unit...
  • Page 12 Local dealer: UK & ROW US & Canada +44 (0) 1732 223900 +1 616 392 3400 sales@contacta.co.uk info@contactainc.com www.contacta.co.uk...

Table of Contents