Technical Specification - WoodFast PT310X Instruction Manual

Planer & thicknesser
Table of Contents

Advertisement

2.3 TECHNICAL SPECIFICATION

SPECIFICATION
Feed speed m/min
Cutterblock speed rpm
Cutterblock diameter mm
Max thicknesser capacity mm
Max planing width mm
Max depth of cut thicknesser mm
Max depth of cut planer mm
Knives pcs
Fence tilting degree
Motor power output
Net Weight kg
2.4 RECOMMENDED PROTECTIVE CLOTHING
• Non-slip footwear is recommended.
• Do not wear loose clothing, neckties or jewellery; they can be caught in moving parts.
• Roll up long sleeves above the elbow.
• Wear protective hair covering to contain long hair.
2.5 NOISE EMISSION
The measurements of noise, in the working position and during operation, were carried out under the standard ISO 7960 Annex B and C:
Instantaneous acoustic pressure:
Constant K=4 dB measured in accordance with EN ISO 3746:1995
The figures quoted are emission levels and are not necessarily safe working levels. Whilst there is a correlation between the emission
and exposure levels, this cannot be used reliably to determine whether or not further precautions are required. Factors that influence
the actual level of exposure of the workforce include the characteristics of the work room and the other sources of noise etc. i.e.
the number of machines and other adjacent processes. Also the permissible exposure level can vary from country to country. This
information, however, will enable the user of the machine to make a better evaluation of the hazard and risk.
2.6 PRESCRIBED USE OF THE MACHINE
This machine is intended for surface planing and thickness planing of solid woods. The permissible workpiece dimensions must be
observed (see Technical Specification).
Any other use is not as specified. Unspecified use, modification of the machine or use of parts not tested and approved by the
equipment manufacturer can cause unforeseen damage.
2.7 HAZARDS
ATTENTION Planer & thicknesser still present risks that cannot be eliminated by the manufacturer. Therefore the user must be aware
that wood working machines are dangerous if not used with care and all safety precautions adhered to.
PT310
7
5300
70
305x200
310
3
3
3
0-45
2.75kW
175
Sound power level(no load)
Sound power level(load)
Sound Pressure level(no load) <89dB(A)
Sound Pressure level(load)
-4-
<98dB(A)
<107dB(A)
<98dB(A)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents