Ryobi TS1342L Operator's Manual page 32

WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemi-
cals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out microscopic particles.
• SERVICE
Now that you have purchased your tool, should a need ever exist for repair parts or service, simply
contact your nearest Authorized Service Center. Be sure to provide all pertinent facts when you
call or visit. Please call 1-800-55-579 for your nearest Authorized Service Center. You can also
check our web site at www.ryobitools.com for a complete list of Authorized Service Centers.
• MODEL NO. AND SERIAL NO.
The model number of this tool will be found on a plate attached to the motor housing.
Please record the model number and serial number in the space provided below.
• HOW TO ORDER REPAIR PARTS
When ordering repair parts, always give the following information:
• MODEL NUMBER
• SERIAL NUMBER
Ryobi is a registered trademark of Ryobi Limited used under license.
®
987000-39
-18-08 (REV:0)
OPERATOR'S MANUAL
10 in. Compound Miter Saw
TS1342L - Double Insulated
TS134L
ONE WORLD TECHNOLOGIES, INC.
148 Pearman Dairy Road, Anderson, SC 965
Phone 1-800-55-579
www.ryobitools.com