Resolution; Movie Length - NanoCamPlus NCP-DVRWIFI User Manual

3. In the settings menu scroll down to and tap the Sync Time setting.
4. Tap Ok to complete the Time Sync.
Note:
1. It is important that you sync the time and date to ensure that the date stamp on the footage matches the time the footage was
recorded.
2. Any footage that is not correctly time stamped may not be accepted by your insurance company.

3.3 Resolution

The Movie Quality setting allows you to set the recording resolution of the NCP-DVRWIFI.
• 1080P recordings will provide a higher quality video, but will yield bigger file sizes.
• 720P will record high definition recordings and will yield smaller file sizes.
To set your required resolution please follow the directions below.
1. Connect your smart device to the NCP-DVRWIFI using the instructions laid out in the WiFI Connection section of this manual.
2. In the home page of the app press the
3. In the settings menu scroll down to and tap the Movie Quality setting.
4. Select your required resolution.
Note:
1. Settings can only be changed via the App while your smartphone is connected to the NCP-DVRWIFI.

3.4 Movie Length

The Movie Length setting allows you to set the amount of time that the NCP-DVRWIFI will record before starting a new
recording.
These are called recording loops.
To set your required recording time please use follow the directions below.
1. Connect your smart device to the NCP-DVRWIFI using the instructions laid out in the WiFI Connection section of this manual.
2. In the home page of the app press the
3. In the settings menu scroll down to and tap the Movie Length setting.
4. Select your required recording length.
Note:
1. Settings can only be changed via the App while your smartphone is connected to the NCP-DVRWIFI.
2. It is advised that you set the recording time to 1 minute, this will mean that any false G Sensor triggers will only save a 1 minute of
footage.
Settings button.
Settings button.
9