Camera Preview; Settings; Park Mode; Setting The Time & Date - NanoCamPlus NCP-DVRWIFI User Manual

2.5.6 Camera Preview

1. Library Button
2. Record Button
3. Photo Button
The Camera Preview screen displays the cameras live view.
To manually start or stop recording tap the Record Button to
toggle recording start and stop.
To take a snapshot tap the Photo Button to take a photo.
3.

Settings

The Sound Record Setting mutes the on board microphone.
To mute the microphone while recording please follow the directions below.
1. Connect your smart device to the NCP-DVRWIFI using the instructions
laid out in the WiFI Connection section of this manual.
2. In the home page of the app press the
3. In the settings menu switch the Sound Record setting on or off as required.
Note:
1. Settings can only be changed via the App while your smartphone is connected to the NCP-DVRWIFI.
2. Audio on videos recorded while the microphone is muted cannot be recovered.

3.1 Park Mode

Park Mode monitors your vehicle while it is parked using the built in G sensor. If an impact to your vehicle is detected the camera
will turn on and record 60 seconds of footage.
To activate Park Mode please follow the directions below.
1. Connect your smart device to the NCP-DVRWIFI using the instructions laid out in the WiFI Connection section of this manual.
2. In the home page of the app press the
3. In the settings menu switch the Parking Mode setting on or off as required.
Note:
1. Settings can only be changed via the App while your smartphone is connected to the NCP-DVRWIFI.
3.2 Setting the Time & Date
The NCP-DVRWIFI will sync the time and date with your smartphone when connected via WiFi.
It is advised that you sync the time and date manually before you begin recording to ensure any footage you record is stamped
with the correct time and date.
To manually sync the time and date, please follow the instructions below.
1. Connect your smart device to the NCP-DVRWIFI using the instructions laid out in the WiFI Connection section of this manual.
2. In the home page of the app press the
8
Settings button.
Settings button.
Settings button.