Setting The Clock - John Lewis Octave Instruction Manual

Instruction Manual
Octave internet radio
Setting the clock / auto-update
Auto-update works with data sent over DAB, FM or the Internet. The clock
is only updated when in a corresponding mode, so it is best to select a
mode you use regularly.
DAB and FM use time signals broadcast with radio transmissions.
Network uses a time signal sent from the Internet radio portal when in any
network-connected mode.
1 Select Update from DAB, Update from FM, Update from Network
or No update.
2 If you are updating from the network, set your time zone.
3 If your country uses daylight saving, the automatically updated time
from the network may be wrong by one hour. When daylight
savings are in effect (during the winter), turn on the Daylight savings
option to rectify this.
Note: That if you are updating the time from DAB or FM, the Daylight
savings option has no effect on the clock' s time.
Octave will auto-update from the selected source when time information
is available.
Manual set
If you set No update, the wizard now prompts you to set the time and date
manually.
The date and time are displayed as dd-mm-yyyy and hh:mm AM/PM with
the first value, dd, active (flashing).
Adjust each value with the Select control.
As each value is set, the next value becomes active and flashes.
23