John Lewis Octave Instruction Manual page 10

Instruction Manual
Octave internet radio
Manual tune cont.
Adjustments to your antenna will be manifested in the received signal
strength displayed.
Note: The division in the signal strength bar indicates the audio quality
threshold – if the signal strength, as indicated by the solid rectangles, falls
below this threshold the audio quality will deteriorate.
When a channel/frequency is selected Octave also scans for any DAB
stations on the selected frequency and updates the station list with any new
stations found. To listen to any stations found, return to the Now playing
screen and select the required station from the station list as normal.
Prune invalid
If a station is not available in your current location a '?' will appear before
the name of the station as shown in the 'station list' .
Prune invalid will remove these stations leaving only ones that are available
at your current location.
Press Menu > Prune Invalid > YES
Dynamic range compression (DRC)
This function reduces the difference between the loudest and quietest
audio being broadcast. Effectively, this makes quiet sounds comparatively
louder, and loud sounds comparatively quieter.
Note: DRC only works if it is enabled by the broadcaster for a specific
station.
To change the DRC setting
Select Menu > DRC > The options available are: DRC high | low | off.
System settings
You can access system settings from all audio settings menus.
For more information see page 28
10