ETC Cobalt Light Server Setup Manual

ETC Setup Guide
®
Cobalt Light Server
Congratulations on your purchase of the ETC Cobalt Light Server. The Cobalt Light Server may be
configured to run the Cobalt application software as a server, backup, or client in a Cobalt, Congo
™
Congo jr , or Congo Kid
Note:
• When the unit is configured as a server, it is the master and maintains the show file and controls
output to the lighting system.
• When the unit is configured as a backup, the unit will perform synchronized backup with a server and
will take control of the lighting system upon the loss of communication with the server.
• When the unit is configured as a client, you can access real time inputs and outputs of the lighting
system through the server.
This document will guide you in the setup and simple operation of the Cobalt Light Server for use with the
Cobalt, Congo, Congo jr, and Congo Kid control systems. For information on integrating the Cobalt Light
Server with your Cobalt Family console, please refer to the Cobalt User Manual that shipped with your
console, or you may download it from our website at www.etcconnect.com.
Check Shipping Contents
Check the shipping carton to ensure all contents have arrived and are undamaged. Your Light Server ships
with the following items:
• USB Mouse
• Cobalt User Manual (on USB Drive)
• IEC Power cord
Electrical and Environmental Specification
• Operating voltage - 100-240VAC, 50-60Hz (2 amps at 120 VAC)
• Ambient temperature and humidity - 0 to 40 degrees C, 95% non-condensing humidity maximum
• Storage temperature and humidity - 0 to 40 degrees C, 95% non-condensing humidity
• CE and ETL Compliant
• Installation Category II, Indoor use only
• Pollution degree 2
Corporate Headquarters
London, UK Tel +44 (0)20 8896 1000

Rome, IT Tel +39 (06) 32 111 683

Holzkirchen, DE
Hong Kong Tel +852 2799 1220

Web: www.etcconnect.com
4370M2220 Rev B

Cobalt Light Server
®
console system.
To use the Cobalt Light Server with Cobalt or Congo Family products, all products
must be running the same software version.
Middleton, WI, USA Tel +608 831 4116
 
Service: (UK)

Service: (UK) service@etceurope.com

Tel +49 (80 24) 47 00-0 Service: (DE)
 
Service: (Asia) service@etcasia.com

© 2015 ETC. All Rights Reserved.

Released 2015-11 ETC intends this document to be provided in its entirety.
 
• USB Keyboard
• 19" Rack Mount Kit
• 3 Active Display Port->DVI Adapters
Service: (Americas)

service@etceurope.com
techserv-hoki@etcconnect.com
Product information and specifications subject to change.

Page 1 of 3
service@etcconnect.com
Electronic Theatre Controls, Inc.
®
,